Features:
- Two combo connections select copper RJ45 or optical SFP media for the protected network paths.
- Stateful firewall, NAT/NAPT, VPN, and routed forwarding control traffic between industrial zones.
- Redundant power, external signal circuits, event logs, and a C-PLUG support managed operation.
The firewall evaluates allowed sessions before routed or translated packets pass from one connected zone to the other.
Combo ports separate media choice from security policy, so an electrical and an optical topology can use the same appliance functions.
Management protocols expose configuration and logs, while the signal contact provides a hardwired indication outside the network stack.
The Siemens 6GK5632-2GS00-2AC2 SCALANCE SC632-2C Industrial Security Appliance may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK5632-2GS00-2AC2 SCALANCE SC632-2C Industrial Security Appliance Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Copper and Fiber Network Paths
- Port arrangement: Two combo connections let each network path use its RJ45 interface or an installed SFP.
- Copper rates: RJ45 links negotiate 10, 100, or 1000 Mbit/s with the connected Ethernet device.
- Optical rates: The corresponding SFP path supports a documented 100 or 1000 Mbit/s transceiver.
- Media selection: Only the selected side of a combo connection carries traffic at one time.
Traffic Control at the Security Boundary
- Stateful inspection: Firewall rules evaluate traffic together with the state of its communication session.
- Address translation: NAT and NAPT map configured addresses or ports between the attached network zones.
- Access control: IEEE 802.1X, RADIUS, and rate-limiting functions control defined access and traffic behavior.
- Security records: Packet-filter, audit, system, and SysLog records expose security and device events.
Encrypted Access and Routed Forwarding
- Remote connection: The OpenVPN client connects the appliance to a configured SINEMA Remote Connect server.
- IP routing: Static IPv4 and IPv6 routes move permitted traffic between the two security zones.
- Dynamic routing: OSPFv2, OSPFv3, and VRRP functions support the documented routed topology.
- Management security: HTTPS, SSH, SFTP, and SNMPv3 provide protected administration channels.
Supply Continuity and External Status
- Redundant feeds: Two 24 V DC inputs can supply the same appliance electronics from separate sources.
- Wide range: Each supply path accepts the documented 9.6 to 31.2 V DC operating range.
- Signal circuits: A digital input receives an external state and the signaling contact reports a configured condition.
- Configuration carrier: The optional C-PLUG retains device settings for transfer independent of internal storage.