Features:
- SIMATIC S7-300 CPU 315F-2 DP fail-safe central processing unit
- 384 KB work memory with required Micro Memory Card
- MPI and PROFIBUS DP master/device communication
Siemens 6ES7315-6FF04-0AB0 places CPU 315F-2 DP processing in the SIMATIC S7-300 station and executes the application program in the documented fail-safe arrangement.
Its integrated 24 V DC feed works from 19.2 to 28.8 V DC, while the required Micro Memory Card accompanies the 384 KB CPU work memory during operation.
MPI and the PROFIBUS DP master/device interface give 6ES7315-6FF04-0AB0 its station communication paths in the 40 mm-wide module.
The Siemens 6ES7315-6FF04-0AB0 CPU 315F-2 DP Fail-Safe CPU may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6ES7315-6FF04-0AB0 CPU 315F-2 DP Fail-Safe CPU Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
CPU Memory Arrangement
- Work memory: 384 KB is integrated in 6ES7315-6FF04-0AB0.
- Memory card: A Micro Memory Card is required and may be specified up to 8 MB.
- Firmware: CPU 315F-2 DP hardware status 01 uses firmware V3.3.
Communication Roles
- MPI: The CPU provides an integrated MPI interface.
- DP role: Its second interface works as a PROFIBUS DP master or device.
- Station use: Select the DP role to match the planned bus position.
Supply Characteristics
- Nominal supply: 24 V DC feeds the CPU.
- Permitted range: 19.2 to 28.8 V DC is specified for 6ES7315-6FF04-0AB0.
- Power loss: Typical dissipation is 4.5 W.
Engineering Basis
- STEP 7: Use V5.5 SP1 or later for 6ES7315-6FF04-0AB0.
- Earlier baseline: STEP 7 V5.2 SP1 requires HSP 218 and Distributed Safety.
- Module format: The CPU width is 40 mm.