6SE7090-0XX84-2FK0

Features:

• Interaction with the SIMOVERT MASTERDRIVES Vector Control and Motion Control System via Serial RS485 Interface
• Incorporates Non-Volatile Memory for Complete Parameter Set Archiving and Transfer
• Supports Point-to-Point and Bus Configurations with Up to 32 Slave Addresses

The 6SE7090-0XX84-2FK0 functions as the OP1S operator control panel for the SIMOVERT MASTERDRIVES platform, providing direct human-machine interface capability for parameterization, startup, and operational monitoring of vector control and motion control units. It communicates with connected drive converters through a serial RS485 interface using the USS protocol, supporting baud rates of 9.6 kBd and 19.2 kBd. The 6SE7090-0XX84-2FK0 features a plain-text display available in five languages (German, English, Spanish, French, Italian), which greatly facilitates parameter navigation and system configuration tasks. In addition to real-time operational display and parameter access, the 6SE7090-0XX84-2FK0 incorporates integrated non-volatile memory capable of permanently storing complete parameter sets. This allows the 6SE7090-0XX84-2FK0 to be used for archiving configurations read out from the units, and subsequently transferring (downloading) stored parameter sets to other compatible drives. The 6SE7090-0XX84-2FK0 can communicate with up to 32 slaves (addresses 0 to 31), making it suitable for both point-to-point links during initial commissioning and multi-device bus configurations .

The 6SE7090-0XX84-2FK0 provides essential operator interface functions across the SIMOVERT MASTERDRIVES system and serves as a critical component during drive commissioning, routine maintenance, and fault recovery procedures. One 6SE7090-0XX84-2FK0 panel can be connected to operate multiple drives within a networked configuration, with the ability to switch between slaves via the "Change slave" function without re-plugging. The 6SE7090-0XX84-2FK0 occupies a compact installation footprint with dimensions of 74 x 174 x 26 mm, and is supplied with 5VDC ±5% at 200mA through its RS485 interface connection. It is designed for operating temperatures from 0°C to +55°C and offers front protection rated at IP54 and rear protection at IP21. The 6SE7090-0XX84-2FK0 meets standards including VDE 0160, VDE 0558, UL, and CSA certifications .

For multi-drive and bus operation applications, the SIMOVERT MASTERDRIVES system can utilize the 6SE7090-0XX84-2FK0 to manage parameter sets across multiple slave units from a single operator panel. During bus configuration, the 6SE7090-0XX84-2FK0 assumes the master function while connected units operate as slaves, enabling centralized parameter management and diagnostics across the drive network. If a specified slave address cannot be located during the "Change slave" operation, the 6SE7090-0XX84-2FK0 outputs an error message to alert the operator. The 6SE7090-0XX84-2FK0 is compatible with optional accessories including 3m and 5m connecting cables (6SX7010-0AB03 and 6SX7010-0AB05), as well as a cabinet door installation adapter with integrated 5m cable (6SX7010-0AA00) .