Features:
- 6AV6646-1BA22-1AA0 presents RDP, VNC, Sm@rtServer, or HTML5 sessions on a 21.5-inch Full HD display.
- The PCAP surface returns multi-touch input to the selected remote host.
- Two Gigabit Ethernet ports share one switch and one IP configuration for line-style network cabling.
Siemens 6AV6646-1BA22-1AA0 serves as a remote operating station rather than a locally engineered Comfort Panel.
Its solid-state storage, RAM, Ethernet switch, and USB ports support the thin-client session and attached peripherals.
A built-in cabinet cutout separates the IP65 operating face of 6AV6646-1BA22-1AA0 from its IP20 rear electronics.
The Siemens 6AV6646-1BA22-1AA0 ITC2200 V3 Industrial Thin Client may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV6646-1BA22-1AA0 ITC2200 V3 Industrial Thin Client Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The Display Depends on a Network Host
- Session source: A compatible panel, IPC, or server supplies the visualization over the selected protocol
- Client rendering: The ITC decodes the remote screen and presents it at Full HD resolution
- Input return: Touch events travel back through the active RDP, VNC, Sm@rtServer, or HTML5 session
- Failure boundary: A blank display can originate from the client, network route, credentials, or remote host
Two Sockets Do Not Mean Two IP Interfaces
- Integrated switch: X1P1 and X1P2 forward traffic through the same internal Ethernet switch
- Shared identity: Both physical ports operate under one client IP configuration
- Cabling option: The second socket can continue the Ethernet line to another supported station
- Diagnostic method: Check link state on each socket before changing the single IP setup
Local Devices Share a Limited Power Budget
- Host function: Four USB 2.0 ports accept supported keyboards, pointing devices, or removable media
- Per-port limit: Each connector supplies no more than the documented 500 mA load
- Session use: A peripheral must also be supported by the thin-client software and remote protocol
- Troubleshooting: Remove high-load accessories before attributing an unstable session to Ethernet
Panel Cutout and Protection Form One Assembly
- Cutout: The enclosure opening is sized for the 513×315 mm mounting boundary
- Operating face: The front reaches IP65 only after the seal is compressed by correct installation
- Cabinet side: Rear electronics retain IP20 protection and require the enclosing cabinet
- Power route: The 24 V DC supply and Ethernet cabling terminate behind the mounted display