Features:
- A four-line LC display presents twenty characters per line with LED backlighting.
- Eight function keys and twenty-two system keys separate configured actions from navigation and data entry.
- TTY, RS232, RS422 and RS485 interfaces provide the serial connection choices for the selected native driver.
The panel forms the operator interface for configured SIMATIC S5 or 505 messages, alarm acknowledgement and recipe handling.
Numeric, alphanumeric and hexadecimal keypad entry lets the project accept different data formats without a touch screen.
Rmos runs the panel project stored in Flash/RAM, while ProTool / Lite V2.51 or higher supplies the configuration environment.
The Siemens 6AV3607-1JC00-0AX1 SIMATIC OP7/PP Operator Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV3607-1JC00-0AX1 SIMATIC OP7/PP Operator Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Four-line message display and keypad
- Display format: The black-and-white LC display presents four lines with twenty characters on each line.
- Backlighting: LED illumination has a stated mean time between failures of 100,000 hours at 25 C.
- Function keys: Eight function keys execute configured actions, and four of them include LED indicators.
- Data entry: Twenty-two system keys support numeric, alphanumeric and hexadecimal keypad input.
Interfaces for the configured driver path
- TTY: One TTY interface is available for the communication arrangement selected in the project.
- RS232: One RS232 interface supplies a separate serial electrical connection.
- RS422: One RS422 interface provides the differential serial option.
- RS485: One RS485 interface completes the available serial bus set for the native S5 or 505 driver configuration.
Operating software and configured data
- Operating system: Rmos runs the operator-panel project on the x86 processor.
- User memory: The panel provides 128 KB of Flash/RAM memory for user data.
- Configuration: ProTool / Lite V2.51 or higher is the specified engineering tool.
- Operator functions: The configuration supports message indication, buffered alarm acknowledgement and recipe management.
Panel dimensions and enclosure limits
- Housing front: The front measures 144 mm wide by 180 mm high, with an overall depth of 38.5 mm.
- Mounting: The documented mounting position is vertical with a maximum 90-degree inclination without external ventilation.
- Protection: The installed front is rated IP65 while the rear of the panel is rated IP20.
- Environment: Storage and transport are specified from -25 to 70 C, and operating relative humidity is limited to 95 percent.