Features:
- Presents WinCC Unified visualization on a 15.6-inch capacitive widescreen display.
- Separates switched PROFINET connections from an additional Industrial Ethernet port.
- Provides four USB interfaces, two SD-card slots, and one combined RS 422/485 port.
Touch input and screen output operate through one front-panel interface for machine visualization and operator control.
The Ethernet architecture supports PROFINET traffic, online access, network management, and media redundancy functions.
Front sealing protects the installed panel face, while service and cabinet connections remain accessible at the IP20 rear.
The Siemens 6AV2128-3QB06-0AX0 MTP1500 Unified Comfort Panel may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6AV2128-3QB06-0AX0 MTP1500 Unified Comfort Panel Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Operator interaction at the panel
- Display Surface: The 15.6-inch widescreen combines visualization and capacitive touch input.
- Project Runtime: A WinCC Unified project defines screens, controls, alarms, and operator navigation.
- Color Output: The TFT renders the configured interface with 16 million display colors.
- Input Boundary: Operator commands enter through the touch surface rather than separate front keys.
Assigning panel network connections
- Switched Ports: Two Ethernet ports form an integrated switch for line or local device connections.
- Independent Port: A separate Ethernet interface can be assigned to another network segment.
- PROFINET Exchange: The panel communicates with configured automation devices over PROFINET.
- Redundancy Support: MRP lets the panel participate in a configured media-redundancy ring.
Peripheral and storage organization
- USB Access: Four USB 3.1 Gen 1 Type A ports accept supported service and peripheral devices.
- Dual Cards: Two SD-card slots separate the panel's removable-media functions.
- Project Media: Configured panel data can be transferred or retained using the supported storage paths.
- Service Boundary: Only media types and file operations supported by the Unified Comfort Panel should be assigned to these ports.
Protection at the enclosure boundary
- Front Seal: Correct cabinet mounting establishes IP65 protection at the operator-facing side.
- NEMA Rating: The installed front also satisfies NEMA 4X and NEMA 12 requirements.
- Rear Area: The connection side remains IP20 and belongs inside the protected enclosure.
- Clock Retention: The hardware real-time clock retains its value for approximately six weeks without external supply.