Ask our team:
  • Phone: +86 181 0690 9650
  • E-Mail sales1@apterpower.com
  • Lifecycle status

    Discontinued / Obsolete by OEM
    Quotations, product manuals, selection support, and model matching for 6GT2811-6BC10-2AA0 are available from Apter Power.

6GT2811-6BC10-2AA0

/ 4.9
1001 reviews | Need a Specific Revision?
Siemens 6GT2811-6BC10-2AA0 is a SIMATIC RF610R UHF RFID reader with an integrated circular antenna and industrial Ethernet communication.
In Stock
Ships by Wednesday, October 28
Fast Shipping Available
Get a quick price for 6GT2811-6BC10-2AA0
Quantity
*E-mail
Company
*Mobile
*Content
Upload (gif, jpg, jpeg, png, bmp, doc, docx, xls, xlsx, ppt, pdf, csv)

Technical specifications for 6GT2811-6BC10-2AA0

  • Manufacturer:
    Siemens
  • Part Number:
    6GT2811-6BC10-2AA0
  • Product Family:
    Siemens Simatic Net
  • Product Type:
    SIMATIC RF610R UHF RFID Reader
  • Stock:
    1
  • Operating Frequency:
    920 to 925 MHz
  • Radiated Power:
    10 to 200 mW
  • Maximum Reading Range:
    1.6 m
  • Air-Interface Standards:
    EPCglobal Class 1 Gen 2 V2; ISO/IEC 18000-62 and -63
  • Maximum Radio Data Rate:
    400 kbit/s
  • Antenna Polarization:
    Circular
  • Ethernet Connector:
    1 x 4-pin M12, D-coded
  • Supported Network Services:
    PROFINET, EtherNet/IP, OPC UA, and TCP/IP
  • Supply Connector:
    1 x 8-pin M12
  • Rated Supply:
    24 V DC
  • Permitted Supply Range:
    20 to 30 V DC
  • Typical Current Consumption:
    0.2 A
  • Protection Rating:
    IP67
  • Operating Temperature:
    -25 to +55 °C
  • Storage and Transport Temperature:
    -40 to +85 °C
  • Status Indicators:
    6 LEDs plus circulating indicator
  • Mounting Pattern:
    VESA 100 with four M4 screws
  • Weight:
    1.102 lbs (0.5 kg)
  • Estimated shipping dimensions:
    8x31.3x31.3cm
  • Tariff Code:
    8517623700
  • Country of origin:
    Germany
  • Place of shipment:
    Xiamen,Fujian,China
By purchasing this item, you agree to the Terms & Conditions, ApterPower is not an authorized distributor for listed manufacturers or tradenames and therefore the manufacturer's warranty does not apply. All our products come with ApterPower's 1-year warranty.

More Information

Overview Manuals Radio Path Network Links Setup Mounting

Features:

  • An integrated circular antenna reads UHF transponders without a separate antenna cable.
  • M12 connections separate the 24 V DC supply from the industrial Ethernet path.
  • PROFINET, EtherNet/IP, OPC UA, and TCP/IP expose tag and diagnostic data.
Siemens 6GT2811-6BC10-2AA0 places the radio and antenna at one compact reading point.

The configured protocol carries processed tag data from 6GT2811-6BC10-2AA0 to the selected controller or application.

Front indicators on 6GT2811-6BC10-2AA0 distinguish link, radio, operating, and diagnostic conditions.

The Siemens 6GT2811-6BC10-2AA0 SIMATIC RF610R UHF RFID Reader may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GT2811-6BC10-2AA0 SIMATIC RF610R UHF RFID Reader Manuals,Datasheets,Link Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

Tag-to-Reader Signal Flow

  • Read zone: The integrated circular antenna launches and receives the UHF field at the reader position.
  • Transponder exchange: The selected EPC or ISO air interface controls the data exchange with compatible tags.
  • Reader processing: Captured identifiers and status information are prepared for the configured host protocol.
  • Commissioning check: Read distance, tag orientation, reflections, and transmitter power must be tested at the installed location.

Controller Communication Paths

  • Physical link: The D-coded M12 socket provides the Industrial Ethernet connection.
  • Protocol role: The configured PROFINET, EtherNet/IP, OPC UA, or TCP/IP service delivers reader data to its host.
  • Addressing: Device name, IP parameters, and controller mapping must agree with the downloaded project.
  • Fault isolation: Link LEDs and protocol diagnostics separate cable faults from configuration or tag-reading problems.

Reader Configuration Checks

  • Engineering data: The selected HSP, GSDML, EDS, technology object, or web interface must match the chosen host path.
  • Radio settings: Transmit power and reading parameters define the intended detection zone.
  • Data handling: Filter and event settings determine which tag observations reach the controller application.
  • Acceptance test: Verify the required tags, traffic direction, diagnostic reporting, and restart behavior after download.

Installation and Environmental Limits

  • Fixing points: Four M4 positions on the VESA 100 pattern secure the reader to its support.
  • Supply path: The eight-pin M12 connection brings the permitted 24 V DC supply into the electronics.
  • Enclosure: Correctly seated connectors are required to preserve the documented IP67 protection.
  • Cold start: Operation near the lower temperature limit must follow the documented warm-up and environmental conditions.
Description
Siemens 6GT2811-6BC10-2AA0 is a SIMATIC RF610R compact UHF RFID reader for the CMIIT frequency range. The reader combines its radio electronics and circularly polarized antenna in one IP67 enclosure, so tag interrogation occurs directly at the installed reading point.

Within 6GT2811-6BC10-2AA0, captured EPC tag data passes from the integrated antenna to the reader processor and then to the configured Ethernet protocol. The project determines whether the connected controller or application receives that data through PROFINET, EtherNet/IP, OPC UA, or TCP/IP services.

An eight-pin M12 connection supplies 6GT2811-6BC10-2AA0 with 24 V DC, while the separate D-coded M12 socket carries the network link. Keeping these two paths distinct helps isolate a missing reader supply from an Ethernet or controller configuration fault.

Mounted through its VESA 100 fixing points, 6GT2811-6BC10-2AA0 must retain the specified clearance and orientation for the intended read zone. Its front indicators separate operating, link, radio, and diagnostic states during commissioning.
Alternative Names
6GT28116BC102AA0 6GT2811 6BC10 2AA0 6GT 2811 6BC10 2AA0 Siemens 6GT2811-6BC10-2AA0 6GT2811-6BC10-2AA0 RFID Reader 6GT2811-6BC10-2AA0 RF610R 6GT2811-6BC1O-2AAO 6GT28I1-6BC10-2AA0
Technical notes
The integrated antenna and selected Ethernet service must share the same commissioning plan for Siemens 6GT2811-6BC10-2AA0 to deliver usable tag data.
Exceptional Service

Our Mission

  • 100% Satisfaction

    We believe expertise is priceless. With over 20 years of experience, and top engineers on staff, we can help you solve or avoid problems that threaten your business.
  • Trust Guaranteed

    Not only do we have a vast inventory, our team makes sure every piece of equipment is in working condition. Your purchases are also backed by our Warranty.
  • Expertise

    Time is money, especially when your equipment is down. We work quickly to get your equipment on its way so you can get it back up and running.

FAQS

The following is a list of questions commonly asked by our customers. Please contact us if you have a question about our process that is not answered below.
Why does 6GT2811-6BC10-2AA0 detect a tag only at very short range?
Check the 6GT2811-6BC10-2AA0 transmitter setting, tag orientation, mounting surface, reflections, permitted frequency range, read-zone alignment, and nearby RF interference.
How can a network fault be separated from an RFID fault on 6GT2811-6BC10-2AA0?
Compare the 6GT2811-6BC10-2AA0 Ethernet link and protocol diagnostics with its radio indicators, then test a known tag inside the configured read zone.
Which connector should be checked when 6GT2811-6BC10-2AA0 has Ethernet link but no power indication?
Inspect the separate eight-pin M12 supply connector of 6GT2811-6BC10-2AA0, its 24 V DC polarity and range, while leaving the D-coded network path unchanged.
Why can 6GT2811-6BC10-2AA0 appear online but send no tag data to the controller?
Verify the 6GT2811-6BC10-2AA0 host protocol, device name, IP settings, controller mapping, event filters, tag standard, and downloaded reader configuration.
What should be verified after relocating 6GT2811-6BC10-2AA0?
Retest the 6GT2811-6BC10-2AA0 read zone, tag orientation, reflections, mounting clearance, transmitter power, network cable, supply connector, and host data exchange.
Why can 6GT2811-6BC10-2AA0 require extra time after a cold start?
Confirm that 6GT2811-6BC10-2AA0 remains within its documented temperature conditions and allow the specified electronics warm-up before judging RF performance.