Features:
- The CP 1613 A2 offloads Industrial Ethernet communication from the host PC.
- A universal-key 32-bit PCI interface carries host data and board power.
- RJ45 and ITP connectors provide two physical media options for the network path.
HARDNET-IE software maps application services to the communication processor.
S7, PG and open communication connections use separately documented resource groups.
SNMP and DCP provide management and network-identification functions.
The Siemens 6GK1161-3AA01 SIMATIC NET CP 1613 A2 PCI Communication Processor may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6GK1161-3AA01 CP 1613 A2 PCI Processor Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Linking PC applications to the communication processor
- PCI edge: The board uses the supported 32-bit host slot for power and data.
- Voltage key: The universal connector accepts the documented 3.3 V or 5 V signaling environment.
- Driver layer: HARDNET-IE software exposes the CP services to host applications.
- Resource handoff: Application requests are processed on the board before network transfer.
Selecting the connector that matches the installed Ethernet medium
- RJ45 port: Twisted-pair Industrial Ethernet uses the documented modular connector.
- ITP interface: The 15-pin connector serves the supported ITP cabling system.
- Shared processor: Both media options belong to the same CP communication resources.
- Link check: Cable type, rate and network partner must agree before traffic is expected.
Assigning communication resources by service type
- S7 services: Configured automation connections exchange data with supported S7 partners.
- PG access: Engineering communication uses its documented connection resources.
- SEND/RECEIVE: Open communication jobs use the separate connection pool.
- Optimized S7: High-performance S7 connections remain within their stated limit.
Rebuilding the PC-side communication configuration
- Board identity: The operating system must detect the exact CP 1613 A2 hardware.
- Software package: The installed HARDNET-IE version provides the required driver and interfaces.
- Network parameters: The saved station configuration restores the intended addresses and connections.
- Application test: A verified partner exchange confirms the host, driver and network path together.