Features:
- Angle-pattern routing: Changes flow direction while providing manual regulation in one valve body.
- Regulating stem: Needle-valve geometry supports controlled manual adjustment rather than simple on-off actuation.
- Tube-fitting ends: Both connections retain the documented 3/8 in Swagelok system.
SS-1RS6-A is a manual regulating needle valve for an engineered fluid system.
Allowable service pressure depends on temperature and every component in the assembled path.
The installation should remain supported, accessible and free from forced tube alignment.
Apter Power can help confirm the Swagelok SS-1RS6-A 316 Stainless Steel Angle-Pattern Regulating Needle Valve and the documented application details before quotation.
Swagelok SS-1RS6-A 316 Stainless Steel Angle-Pattern Regulating Needle Valve Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Service medium: Review 316 stainless compatibility with the process fluid.
- Pressure basis: Derate the complete assembly for operating temperature.
- Flow need: Confirm the regulating range suits the intended process adjustment.
- Connection scope: Match both 3/8 in tube ends and included component scope.
- Tube quality: Use compatible tubing material, diameter, wall and hardness.
- Preparation: Cut square, remove burrs and keep sealing surfaces clean.
- Body support: Prevent the valve from carrying tube weight or vibration.
- Access: Leave room to operate and inspect the regulating stem.
- Stem feel: Investigate abnormal resistance instead of applying excessive hand force.
- Leak location: Distinguish tube-connection leakage from stem or seat leakage.
- Flow proof: Verify the required adjustment range under controlled process conditions.
- Maintenance boundary: Isolate the fluid system before disturbing the valve or fittings.
- Instrument regulation: Adjusts flow in analyzer or measurement tubing.
- Sample systems: Provides compact angle routing and manual control.
- Utility panels: Regulates documented gas or liquid branches after system review.
- Legacy replacement: Restores an exact SS-1RS6-A valve position and connection pattern.