Features:
- EA402 913-402-000-013 provides 70Ω FEP coaxial cable with self-locking miniature coaxial connectors for TQ402/TQ412.
- -40°C to +200°C operation with IP68 transducer head and Ex ia IIC T6 hazardous area certification.
- Supports 1m, 5m, and 10m total system lengths with electrical trimming for optimal performance.
The EA402 913-402-000-013 is constructed with FEP-covered 70Ω coaxial cable, providing excellent signal integrity and environmental protection for proximity measurement systems. The FEP (fluorinated ethylene propylene) sheath offers resistance to almost all chemicals and low permeability to liquids, gases, and moisture, making the EA402 913-402-000-013 suitable for harsh industrial environments including chemical plants, offshore platforms, and refineries. The cable has a diameter of 3.6mm and is terminated with self-locking miniature coaxial connectors that are hand-tightened until locked, requiring no special tools. This connector design ensures secure, vibration-resistant connections that prevent loosening during operation.
The EA402 913-402-000-013 operates reliably from -40°C to +200°C, making it suitable for high-temperature turbine and compressor applications where standard cables would fail. The transducer head (tip and integral cable) is rated IP68, providing complete dust-tight protection and resistance to continuous immersion, ensuring reliable performance in wet or contaminated environments. The EA402 913-402-000-013 is available in Ex certified versions for use in hazardous areas, including ATEX, IECEx, CSA, and KGS approvals for Zone 0, 1, and 2 (gas) and Zone 21 and 22 (dust).
The EA402 913-402-000-013 supports flexible total system length configurations to suit various installation requirements. When combined with the TQ402/TQ412 transducer's integral cable, the EA402 913-402-000-013 can achieve total system lengths of 1 meter (1.0m integral with no extension), 5 meters (various combinations such as 0.5m + 4.5m, 1.0m + 4.0m, or 5.0m integral with no extension), or 10 meters (1.0m + 9.0m, 5.0m + 5.0m, or 10.0m integral with no extension). Due to the characteristics of the coaxial cable, an "electrical trimming" of the nominal length is necessary to optimize system performance and transducer interchangeability. The minimum total system length for a 5m measurement chain is 4.4m, and for a 10m chain is 8.8m.
The EA402 913-402-000-013 Vibro-meter Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Vibro-meter EA402 913-402-000-013 Extension Cable Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Vibro-meter EA402 913-402-000-013 Extension Cable Specs
General
- Manufacturer Vibro-meter
- Model EA402 913-402-000-013
- Condition New Original ready stock
- Product Family
GSI124 244-124-000-022,TQ412 S3960 111-412-000-013
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Critical Rotating Machinery Monitoring: Widely used to measure shaft relative vibration, axial dynamic displacement, shaft eccentricity, and rotational speed.
- Power Generation Turbines: Extensively deployed on high-capacity steam turbines, industrial gas turbines, and massive hydro-generator units where displacement accuracy is crucial.
- Oil & Gas Petrochemical Assets: Applied to high-pressure centrifugal compressors, multi-stage turbo-compressors, and critical process pumps.
- Heavy Duty Manufacturing Equipment: Serves structural state monitoring for steel rolling mills, industrial gearboxes, and large cooling tower fans.
- Intrinsically Safe Approvals (Ex i): Certified under European ATEX (CENELEC) and international IECEx frameworks for explosive atmospheres. The specific part segment suffix confirms it satisfies requirements for deployment in Zone 0, Zone 1, and Zone 2 gas/dust hazards.
- North American Compliance: Carries regional CSA and FM (Factory Mutual) approvals, validating safety integrity for Class I, Division 1 and 2 explosive groups.
- Ingress Protection Rating: Features advanced mechanical sealing technology; when paired with matching rugged connector boots, the assembly achieves an IP68 protection rating (per IEC 60529) against high-pressure water jets and heavy dust infiltration.
- Tuned System Matching: The cable exhibits a strict 70 Ω characteristic impedance to ensure error-free signal transmission. It must be explicitly matched in length to configure a complete system length (typically 5 meters or 10 meters total when combining the probe's integral cable and the EA402 extension).
- Transducer Interoperability: Fully interoperable with the Vibro-Meter TQ402, TQ412, and TQ442 proximity displacement sensors. It handles the high-frequency power provided by the downstream machinery health racks.
- Signal Conditioner Integration: Connects seamlessly via self-locking, miniature coaxial connectors directly to IQS450 or IQS452 signal conditioners, which convert the signal into raw analog voltages for processing.