Features:
- Vnet/IP connection: links a PC/AT-compatible computer to the control network
- Gigabit transfer: 1 Gbps full-duplex 1000BASE-T communication
- PCI Express interface: supports compatible x1 through x16 slots
The VI702 S1 is a PCI Express control-bus interface card for Vnet/IP-connected computer stations.
It communicates through CAT5e UTP cable and an RJ45 connector over a documented maximum distance of 100 m.
Verify the available PCI Express slot, 3.3 V supply, Vnet/IP settings, and Layer 2 switch connection before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Yokogawa VI702 S1:
Yokogawa VI702 S1 Vnet/IP Interface Card Specifications
General
- ManufacturerYokogawa
- ModelVI702 S1
- ConditionNew and factory sealed
- Product FamilyVnet/IP Interface Cards
- Transmission: 1000BASE-T at 1 Gbps full duplex
- Media: CAT5e UTP cable with an RJ45 connector
- Link length: 100 m maximum between the card and Layer 2 switch
- Status indication: RDY, RCV, and SND lamps show card and traffic states
- Applicable slot: PCI Express x1 through x16
- Bus revision: PCI Express CEM Specification 1.0a x1
- Signaling: 2.5 GT/s
- Restriction: VI702 cannot be installed in a legacy PCI slot
- Interface compatibility: Yokogawa states that VI702 is compatible with VI701
- Mixed installation: VI701 and VI702 cards can coexist on the same bus
- Station settings: domain and station numbers are set in the same manner
- Replacement check: confirm computer slot, software release, and network design before substitution