Features:
- Multifunction control execution: Supports configured control strategies and user-program duties in the INFI 90 OPEN rack.
- Rack-system integration: Works with established controller communications and I/O processing paths.
- Redundant deployment support: Can be applied in a documented paired architecture with controlled transfer testing.
IMMFP11 remains relevant to maintained INFI 90 OPEN installations whose control configuration, communication paths and rack hardware must be preserved during service.
Troubleshooting should combine processor diagnostics with rack power, Controlway status, I/O processors, serial termination and the running configuration.
A safe replacement workflow captures switch positions, firmware, user programs, station mapping, communications and a verified restoration sequence.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
ABB IMMFP11 Harmony Rack Multifunction Processor Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB IMMFP11 Harmony Rack Multifunction Processor Specs
General
- ManufacturerABB
- ModelIMMFP11
- ConditionNew Original ready stock
- Product FamilyABB INFI 90 OPEN / Harmony Rack
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Slot record: Document rack position and address settings.
- Controlway: Verify controller communication and neighboring modules.
- I/O processors: Map every connected interface and process area.
- Power: Check rack supply before diagnosing the processor.
- Mode: Confirm RS-232-C or RS-485 use for each path.
- Termination: Match NIMP01 or NTMP01 to the installed wiring.
- Settings: Record baud, framing, protocol and addresses.
- Test: Verify data quality and reconnect behavior.
- Source backup: Preserve configuration, user code and tuning.
- Target architecture: Do not assume a BRC is a plug-in replacement.
- Interface map: Compare rack, I/O, serial and redundancy paths.
- Acceptance: Repeat process and failure-response tests.