Features:
- It is a Procontrol P14 station bus coupling module.
- The documented configuration is for a master station.
- Redundant partners must use the same firmware version.
The current ordering configuration is GJR2393200R1210 88TK05B-E, tied to the official GJR2393200R1210 product record and 88TK05R1210 type designation.
The module couples a Procontrol P14 master station to the station bus and must be firmware-aligned in redundant arrangements.
Confirm the complete page identifier, master-station role and firmware equality of both redundant modules before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
ABB GJR2393200R1210 88TK05B-E General Specifications
General
- ManufacturerABB
- ModelGJR2393200R1210 88TK05B-E
- ConditionNew / Surplus / Refurbished
- Product FamilyProcontrol P14 Communications
- ABB identifies the unit as a station bus coupling module.
- The documented role is the Procontrol P14 master station.
- Bus settings must remain consistent with the engineered station configuration.
- The official record identifies a recent firmware configuration.
- Both modules in a redundant pair must run the same firmware version.
- Record the installed firmware before removing either redundant module.
- GJR2393200R1210 has official net dimensions of 198 x 261 x 20 mm.
- The module belongs to the Procontrol P14 communications architecture.
- Verify slot, station addressing and redundancy cabling before commissioning.