- Processes signals from six documented KL13xx optical sensor heads
- Provides high-speed displacement processing at a 64 kHz sampling frequency
- Integrates parallel measurement I/O and RS-232C communication
KL2300A is an Anritsu sensor processing unit for the High Performance Optical Micro non-contact displacement-measurement system.
It combines sensor-head correction data, high-speed signal processing, received-light and displacement monitoring, and rear-panel interfaces for installation in a measurement system.
Before installation or replacement, verify the exact sensor head, cable path, mounting, AC supply, connector mapping, logic polarity, serial settings, averaging, and target-surface conditions.
Availability, condition, price, and shipping time for KL2300A are confirmed during quotation.
Anritsu KL2300A Sensor Processing Unit Manuals, Product Family, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Samples the measurement system at 64 kHz
- Provides a 20 kHz response frequency at -3 dB
- Supports simple and moving-average processing for different surface conditions
- Provides a seven-level received-light indicator for head alignment
- Provides a five-level displacement-output indicator
- Supports zero, sensitivity, limits, dark-level, and measurement-condition settings
- Provides 16-bit negative-logic parallel displacement output
- Provides 8-bit received-light and 8-bit alarm parallel outputs
- Provides 9-pin RS-232C communication at four selectable baud rates
- Thickness and warpage measurement of wafers, disks, and LCD glass
- QFP lead-lift and lead-position inspection
- Surface-profile measurement of molded portable-telephone housings