Features:
- DSE7320 serves as the intelligent control interface between the generator set and mains utility monitoring system
- Integrates automatic mains failure detection with generator auto-start functionality
- Compatible with both electronic (CAN) and non-electronic (magnetic pickup/charge alternator sensing) engines
DEEPSEA DSE7320 functions as the core Automatic Mains Failure (AMF) control module within generator set control systems, providing comprehensive monitoring and control capabilities for single diesel or gas genset applications. This module continuously monitors three-phase mains voltage (phase voltage 15-415V AC, line voltage 26-719V AC) and frequency (3.5-75Hz), automatically starting the generator set and transferring load upon mains failure. DSE7320 features a 4-line backlit LCD display with 5 menu navigation keys, supporting front panel parameter editing with password protection and incorporating a power-save mode to reduce energy consumption.
DSE7320 offers extensive expansion interfaces including USB port, RS232 and RS485 communication ports (supporting simultaneous dual serial port operation), plus a dedicated DSENet® expansion port capable of connecting up to 3 remote display modules. The module provides 6 configurable digital outputs, 2 relay dry contact outputs (8A 250V passive contacts) and 8 configurable digital inputs, with 6 analog/digital inputs flexibly configurable for 0-10V or 4-20mA signals to accommodate various sensor connections.
In terms of protection functions, DSE7320 delivers overload protection, reverse power protection, load imbalance protection and independent earth fault trip protection. The module supports both electronic and non-electronic engine control with fuel consumption anomaly monitoring, low fuel level alarm and charge failure alarm capabilities. Through its built-in real-time clock and 250-event log capacity, DSE7320 maintains complete operational history records. Users can configure parameters via free DSE Configuration Suite PC software, with support for custom MODBUS addressing enabling SCADA system monitoring, plus SMS remote control for generator start/stop operations.
The DSE7320 DEEPSEA Automatic restart control module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
DEEPSEA DSE7320 Automatic restart control module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
DEEPSEA DSE7320 Automatic restart control module Specs
General
- Manufacturer DEEPSEA
- Model DSE7320
- Condition New Original ready stock
- Product Family DSE8680 MKII,DSE8620 MKII,DSEG8660,DSE2130
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Standby Power Systems: Automatically detects mains failure and starts the generator to maintain power for critical facilities like hospitals, data centers, and telecommunications sites.
- Single Gen-Set Control: Suitable for a variety of gas or diesel generator applications that require comprehensive engine parameter monitoring and protection.
- Remote Monitoring: Utilizes integrated RS232 and RS485 ports for connection to Building Management Systems (BMS) or remote PC software for off-site tracking.
- Engine Adaptation: Compatible with both electronic (CAN) and non-electronic (magnetic pick-up) engines, making it adaptable for older equipment and modern systems.
- Updates: Users can download the latest firmware from the official Deep Sea Electronics website by registering for a free account.
- Procedure: To update, connect a PC to the module via a USB A to USB B cable, open the Configuration Suite, and use the Firmware Update Wizard found under the "Tools" menu.
- Configuration Security: It is recommended to read and save the existing configuration file from the module before initiating a firmware update to prevent accidental data loss.
- Operating Temperature: -30°C to +70°C (-22°F to +158°F).
- Storage Temperature: -40°C to +85°C (-40°F to +185°F).
- Heated Display Variant: -40°C to +70°C (-40°F to +158°F).
- Operating Humidity: 0% to 93% relative humidity, non-condensing (tested at 40°C for 48 hours).
- Storage Humidity: Up to 95% relative humidity (tested under cyclic damp heat conditions).
- Environmental Protection: IP65 rating (front of module) when installed with the supplied sealing gasket.