Features:
- Two-axis coordination: Independent moves and interpolation are available from one Universal PCI board.
- Flexible pulse interface: Common pulse-command formats support qualified stepper or servo drive connections.
- PC-based integration: Motion functions, feedback and machine I/O can be coordinated by the host application and matching driver.
PCI-1220U is used where an industrial PC must command two pulse-input motion axes and monitor their position feedback.
Its usefulness depends on the complete control chain: operating-system support, Advantech driver, application code, breakout wiring, drive settings and machine limits.
Acceptance should start with disabled power stages, then prove signal polarity, feedback direction, limits, single-axis travel and coordinated paths in controlled stages.
Apter Power can help confirm the Advantech PCI-1220U 2-Axis Universal PCI Motion Control Card, driver context and connector requirements before quotation.
Advantech PCI-1220U 2-Axis Universal PCI Motion Control Card Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Pulse format: Match CW/CCW or pulse/direction to the exact connected drive configuration.
- Encoder feedback: Verify channel wiring, voltage interface and direction before closing a position loop.
- Limit inputs: Prove positive, negative and home sensors independently from software travel limits.
- Connector map: Preserve the approved 50-pin breakout and cable pinout for each machine axis.
- Acceleration shape: Select trapezoidal or S-curve behavior from the real mechanism and load.
- Interpolation setup: Validate coordinate direction and scale before executing a circular or multi-axis path.
- Handwheel control: Apply suitable scale and enable logic so manual pulses cannot exceed safe travel.
- Pulse ceiling: Keep command frequency inside both the board and receiving-drive limits.
- Driver baseline: Record the host operating system, Advantech driver and application version.
- Restricted motion: Begin with low speed, low acceleration and a controlled travel envelope.
- Direction proof: Compare commanded sign, physical travel and encoder count before full-power tests.
- Safety separation: Confirm emergency stopping remains effective without relying on the host application.
- Indexing machinery: Coordinates two pulse-commanded axes for repeatable point-to-point moves.
- Inspection systems: Positions parts or sensors under PC-based test software.
- Dispensing equipment: Produces controlled linear or interpolated paths when the mechanics are qualified.
- Legacy PC motion: Restores an installed Universal PCI control position with the original driver and wiring evidence.