- High-current Kinetix 6200/6500 modular axis power section
- 141 mm two-slot format for a Bulletin 2094 power rail
- 1175 µF internal capacitance for common-bus system calculations
Allen-Bradley
2094-BM05-M provides the power section for one high-current servo axis in a modular Bulletin 2094 system.
Pair it with the appropriate Kinetix 6200 or Kinetix 6500 control module and verify the supported motor, feedback device, connector hardware, cables, and firmware.
Selection must include IAM and rail capacity, common-bus capacitance, regenerative duty, conductor sizing, enclosure airflow, grounding, and migration validation.
2094-BM05-M availability, condition, price, and shipping time are confirmed during quotation.
Allen-Bradley 2094-BM05-M Kinetix 6200/6500 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Motor-power conductors are specified up to 30 mm² or 3 AWG
- The published motor-power strip length is 16 mm
- The documented motor-power terminal torque is 2.4...3.0 N·m
- Mount the power module upright on the Bulletin 2094 power rail
- Operate within the documented 0...50 °C ambient temperature range
- Maintain the required airflow and connector clearances inside the enclosure
- Rockwell Automation lists 2198-S086-ERS3 as the engineering replacement
- Recheck mechanics, DC-bus architecture, motors, feedback, network, and cabling
- Revalidate firmware and machine-safety functions before returning the axis to service
- High-current single-axis motion in Kinetix 6200 or Kinetix 6500 systems
- Bulletin 2094 modular power-rail systems with compatible IAM capacity
- Modernization projects requiring engineering review of the replacement architecture