Features:
- HMI interface assembly: combines the PFNI base board and NetBurner processor card.
- Service connectivity: provides diagnostic, Ethernet, SD-card, and internal display connections.
- Replacement control: the existing HMI SD card is transferred to the new board.
Rockwell Automation 80190-780-01-R is documented as the PowerFlex 7000 HMI interface board assembly connecting the HMI subsystem with the drive processor module.
The board provides Port 0 diagnostics through J3 or USB, 100 Mbps full-duplex Ethernet, internal display-module connectivity, and removable SD-card storage.
During Rockwell Automation 80190-780-01-R replacement, preserve cable positions, move the existing SD card, and keep all SW2 positions at their documented Off defaults unless the applicable service procedure requires a change.
Availability is subject to Apter Power's current inventory and sourcing confirmation.
Rockwell Automation 80190-780-01-R Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Rockwell Automation 80190-780-01-R PowerFlex 7000 HMI Interface Board Specs
General
- ManufacturerRockwell Automation / Allen-Bradley
- Model80190-780-01-R
- ConditionNew Original ready stock
- Product FamilyPowerFlex 7000
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
HMI connection map
- Drive processor: connect the HMI interface board to the DPM as documented.
- Diagnostics: use Port 0 through J3 or USB for the documented service path.
- Display link: retain the internal display-module connection and cable orientation.
- Network link: the board supports 100 Mbps full-duplex Ethernet.
Replacement workflow
- Record first: photograph every 80190-780-01-R connection and the complete label.
- Transfer storage: move the existing HMI SD card to the replacement board.
- Retain defaults: leave all SW2 positions Off unless the service procedure states otherwise.
- Verify restoration: check the documented HMI, DPM, display, diagnostic, and Ethernet paths after service.
Product applications
- PowerFlex 7000 HMI: 80190-780-01-R serves the documented drive human-machine interface subsystem.
- Drive-processor communication: the assembly links HMI functions with the DPM.
- Maintenance diagnostics: Port 0 supports the documented diagnostic-access path.
- Interface services: Ethernet, SD-card, and internal display connections support the HMI architecture.