Features:
- 230–480 V AC three-phase input for high-voltage Ultra3000 systems
- 33.2 A continuous and 66.5 A peak output-current ratings
- Eight optically isolated inputs, four outputs, and configurable serial communications
This catalog number identifies a high-voltage Ultra3000 digital servo drive with 47 A continuous and 94 A peak current expressed as zero-to-peak ratings.
The drive converts three-phase input power for compatible servo motors and provides dedicated user I/O, motor feedback, and serial communication connectors.
Before ordering Allen-Bradley 2098-DSD-HV220, confirm the complete order code, documented configuration, and connection requirements for the installed system.
2098-DSD-HV220 Datasheet Manuals, Datasheets, Drivers, Link
Documentation Note: This document is provided for technical reference. Please confirm the applicable product configuration and document revision before ordering.
- The CN1 44-pin user I/O connector carries digital inputs, digital outputs, analog signals, and related control connections for the installed machine.
- The CN2 15-pin motor-feedback connector is dedicated to compatible encoder or resolver feedback and must match the connected motor feedback type.
- The CN3 nine-pin serial connector supports RS-232, RS-422, or RS-485 communication at selectable rates from 1200 through 38,400 bps.
- Official input protection guidance identifies LPJ-35SP branch-circuit fusing for the high-voltage 47 A continuous / 94 A peak drive configuration.
- The recommended input contactor is selected for the drive rating and must be integrated with the machine safety and power-disconnect design.
- Drive commissioning requires verification of grounding, branch protection, motor power, feedback wiring, and control-power connections before the enable command is applied.
- Continuous operation is specified for 0 °C to 55 °C ambient temperature when ventilation and spacing requirements are maintained.
- The drive is specified for 5% to 95% relative humidity without condensation and storage temperatures from -40 °C to 70 °C.
- Installations above 1500 m require output-current derating according to the official Ultra3000 design guidance and the final cabinet thermal assessment.
- The drive supplies controlled three-phase motor power for a compatible Ultra3000 servo axis using documented motor-power and feedback connections.
- Its user I/O can interface machine enable, registration, limit, and status signals when each electrical characteristic matches the official connection tables.
- The serial interface supports setup and communication functions within a correctly engineered Ultra3000 installation; verify software, wiring, and hardware series before commissioning.