Features:
- Fourteen 24 V DC input switches
- Designed for CPU 1214 and CPU 1215
- Compact input simulation for controller checks
The Siemens 6ES7274-1XH30-0XA0 is a SIMATIC S7-1200 SIM 1274 simulator module intended for CPU 1214 and CPU 1215 controllers. It provides fourteen switches for simulating 24 V DC digital input states. The module supports controlled checks of input-dependent program functions during commissioning and maintenance. Its wider switch arrangement corresponds to the supported controller input configuration.
No digital outputs, analog inputs or analog outputs are included in this simulator. The fourteen switches provide the input-simulation function specified in the official Siemens data. Device dimensions are 67 x 35 x 23 mm, and the enclosure is rated IP20. The simulator must remain within the operating and installation conditions of the associated S7-1200 hardware.
Use this order number only after confirming compatibility with the intended CPU 1214 or CPU 1215. Switch operation can help verify program responses before the permanent field-input devices are connected. The module is a commissioning aid and does not replace final sensor testing or machine-safety validation. Installation and removal should follow the Siemens hardware instructions and the required power-isolation procedures.
Input-simulation projects for CPU 1214 and CPU 1215 using the 6ES7274-1XH30-0XA0 can be supported with official documentation and sourcing guidance. Siemens records product phase-out from 1 November 2026; stock and lead time are subject to confirmation.
Siemens 6ES7274-1XH30-0XA0 SIM 1274 Simulator Module Manuals, Datasheets, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Siemens 6ES7274-1XH30-0XA0 SIM 1274 Simulator Module Specs
General
- ManufacturerSiemens
- Model6ES7274-1XH30-0XA0
- ConditionNew Original ready stock
- Product FamilySIMATIC S7-1200 SIM 1274 Simulator Modules
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Simulator Inputs:
- Fourteen digital input switches
- 24 V DC rated value
- No digital outputs
- No analog channels
CPU Compatibility:
- SIMATIC S7-1200 CPU 1214
- SIMATIC S7-1200 CPU 1215
- Input simulation during commissioning
- Confirm exact CPU before installation
Installation Notes:
- 67 x 35 x 23 mm dimensions
- IP20 degree of protection
- Use only with compatible input points
- Remove power before fitting or removal