Features:
- Provides 4.18 N-m continuous and 11.1 N-m peak stall torque.
- Uses single-turn high-resolution Hiperface feedback with a keyed shaft.
- Includes a 24 V DC holding brake and IEC metric flange.
The current catalog configuration is MPL-B330P-SJ24AA, a 400 V-class 100 mm-frame low-inertia servo motor with a 76.2 mm magnet stack.
It supplies high-dynamic rotary motion for machinery that requires accurate position, velocity, and torque control.
Verify the drive, feedback interface, connector and cables, brake control, shaft load, flange, tuning, and enclosure needs before installation.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Allen-Bradley MPL-B330P-SJ24AA:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Drive packaging and converting axes that require low rotor inertia and responsive acceleration.
- Control material-handling, electronic-assembly, or automotive motion after axis sizing is verified.
- Replace an installed motor only when mechanical, feedback, connector, brake, and drive details match.
- The MPL-B330P rating is 4.18 N-m continuous stall torque and 11.1 N-m peak stall torque.
- Rated output is 1.8 kW at a documented rated and maximum speed of 5000 rpm.
- Rotor inertia is 0.00012 kg-m2 for high dynamic response in correctly sized axes.
- The standard motor provides a minimum IP50 rating without a shaft seal.
- IP66 protection requires the optional shaft seal and specified factory-delivered Kinetix 2090 cables.
- Shaft seals require periodic inspection and replacement according to the operating conditions.
- Kinetix MPL rotary motors are UL Recognized components to applicable UL and CSA standards.
- The motor family is CE marked for applicable directives.
- The metric flange follows the documented IEC mounting arrangement for this configuration.