Features:
- The IGD8 board performs inverter gating control inside specified SIMOVERT high-power equipment.
- AC host devices cover 500 to 690 V three-phase operation at 50 or 60 Hz.
- The same order number is assigned to 675–930 V DC equipment in 860 A and 1580 A classes.
The module is treated as an internal converter spare part, so its identity is tied to the host drive electrical class.
AC voltage, DC voltage, and current class form separate selection checks before the board number is accepted.
Service records should preserve both the complete module marking and the complete SIMOVERT equipment nameplate information.
The Siemens 6SE7036-5GK84-1JC2 SIMOVERT MASTERDRIVES IGD8 Inverter Control Module may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Siemens 6SE7036-5GK84-1JC2 SIMOVERT IGD8 Inverter Control Module Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Three-Phase Converter Assignment
- Voltage window: The module is identified for SIMOVERT devices operating from 500 to 690 V three-phase AC.
- Line frequency: The associated converter supply may operate at 50 or 60 Hz.
- Equipment boundary: The stated voltage range describes the host converter class, not a low-voltage signal input.
- Selection point: Confirm the complete drive nameplate before matching the internal control module.
DC-Fed Equipment Assignment
- DC window: The corresponding DC equipment range extends from 675 to 930 V DC.
- Internal role: The control board belongs inside the inverter power-conversion assembly.
- Variant check: A DC-link voltage match is required together with the exact module order number.
- Service isolation: The host converter must follow its approved de-energization procedure before internal board work.
High-Power Device Matching
- First class: One documented equipment current level for this module is 860 A.
- Second class: The second listed device current level is 1580 A.
- Configuration link: Current class is checked with the host voltage range and converter construction.
- Ordering control: The full 6SE7036-5GK84-1JC2 identity separates this board from other IGD variants.
Replacement Record Checks
- Module family: IGD8 identifies the inverter-control board function within the SIMOVERT equipment.
- Host record: Record the complete converter order number and electrical class before removing the original board.
- Board record: Match the full printed 6SE7036-5GK84-1JC2 order number rather than a shortened 6SE7036 base.
- Commissioning scope: After service, the complete drive protection and gating checks follow the approved equipment procedure.