- Keep both exact component numbers and the documented 5.0 m system length
- Verify that the 40 mm sensor case suits the bracket and target reach
- Field-calibrate the complete sensor, cable and converter chain
Emerson EZ1081-04-00-010 EZ1901-040 combines an armored EZ1081 8 mm eddy-current sensor with an armored EZ1901 extension cable to form a documented 5.0 m measuring chain.
The combination uses a 40 mm sensor case, 0 mm unthreaded section, 1.0 m integral sensor cable and 4.0 m armored extension cable.
Before installation, verify converter compatibility, target material, bracket geometry, probe gap, connector sealing, cable routing and field calibration.
Availability, condition, price, and shipping time for EZ1081-04-00-010 EZ1901-040 are confirmed during quotation.
Emerson EZ1081-04-00-010 EZ1901-040 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use the 40 mm armored sensor case with a rigid and adequately supported bracket
- Keep the sensing face correctly aligned with the target surface
- Confirm that the required probe gap is maintained throughout machine movement
- Connect the 1.0 m integral sensor cable to the 4.0 m armored extension cable
- Protect the cable connection from moisture, vibration and mechanical strain
- Do not cut, shorten or splice either component of the calibrated measuring chain
- Configure the compatible AMS EZ 1000 converter for the complete 5.0 m chain
- Perform field calibration using the actual installed target material
- Record the probe gap, measurement scale, baseline signal and alarm-test results
- Radial shaft-vibration measurement on turbines, compressors and rotating machinery
- Axial-position, differential-movement and eccentricity measurement
- Speed and key-reference sensing with a correctly configured AMS EZ 1000 converter