- Keep both exact component numbers and the 10.0 m total system length
- Verify the 70 mm sensor case suits the bracket and target reach
- Field-calibrate the complete sensor, cable and converter chain
Emerson EZ1081-07-00-010 EZ1901-090 combines an armored EZ1081 8 mm eddy-current sensor with an armored EZ1901 extension cable for a documented 10.0 m system length.
The exact components specify a 70 mm sensor case, 0 mm unthreaded section, 1.0 m integral sensor cable and 9.0 m extension cable.
Before installation, verify converter compatibility, the longer 70 mm case reach, bracket stiffness and 10 m cable route, target material and diameter, bracket geometry, connector sealing, cable route, total electrical length and field calibration.
Availability, condition, price, and shipping time for EZ1081-07-00-010 EZ1901-090 are confirmed during quotation.
Emerson EZ1081-07-00-010 EZ1901-090 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Support the 70 mm armored case with a rigid bracket
- Avoid side load and excessive unsupported length
- Check clearance over the complete shaft movement envelope
- Combine the 1 m sensor lead with the 9 m extension
- Keep the total electrical length at the documented 10 m
- Do not cut, splice or substitute a random cable
- Check bracket resonance before interpreting vibration
- Field-calibrate with the actual target and converter
- Record baseline bias and vibration during controlled run-up
- Radial shaft vibration measurement on turbines and compressors
- Axial position or differential movement measurement
- Speed, key and eccentricity sensing with the configured AMS EZ 1000 converter