Features:
- Two-loop acquisition: independent configuration for two current signals
- Current ranges: 0...20 mA and 4...20 mA support
- Diagnostic data: high/low alarms plus overrange and underrange status
1734-IE2C provides a compact two-loop current-input path with detailed per-channel configuration.
The notch frequency trades response speed against noise rejection, so it should be chosen from the real process and interference environment.
A durable service baseline records measured loop current, raw count, scaling, alarms, and return-path wiring for both channels.
Availability of 1734-IE2C is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1734-IE2C POINT I/O 2-Channel Analog Current Input Module Manuals and Product Resources
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1734-IE2C POINT I/O 2-Channel Analog Current Input Module Specs
General
- ManufacturerAllen-Bradley
- Model1734-IE2C
- ConditionNew Original ready stock
- Product FamilyPOINT I/O 1734
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Separate process and circuit faults
- Live zero: use 4...20 mA where the transmitter design requires fault visibility.
- Loop power: measure supply and current at the terminal base.
- Common: review non-isolated channel reference paths.
- Status: interpret under/overrange before changing scaling.
Choose the two-channel response
- Interference: identify mains or process noise frequency.
- Notch: select the supported setting that meets response needs.
- Scaling: retain signed-integer and engineering-unit mapping.
- Verification: compare both channels with a calibrated source.
Supported product applications
- Two-wire transmitters: acquire documented 4...20 mA process loops.
- Current sensors: read 0...20 mA devices where live-zero detection is not required.
- Machine skids: combine two analog feedback points in one remote slot.
- Maintenance spares: replace a validated two-channel current-input position.