Features:
- Channel format: two single-ended voltage inputs
- Selectable ranges: 0...10 V or ±10 V by configuration
- Signal processing: Delta Sigma conversion with selectable notch filtering
1734-IE2V is intended for voltage-measurement tasks that require two compact POINT I/O channels.
Its configurable unipolar and bipolar ranges make the channel setup a critical part of the measurement record.
Ground reference, shielding, filtering, and scaling should be validated together during commissioning.
Availability of 1734-IE2V is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1734-IE2V POINT I/O 2-Channel Analog Voltage Input Module Manuals and Product Resources
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1734-IE2V POINT I/O 2-Channel Analog Voltage Input Module Specs
General
- ManufacturerAllen-Bradley
- Model1734-IE2V
- ConditionNew Original ready stock
- Product FamilyPOINT I/O 1734
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Configure the voltage path
- Range: select 0...10 V or ±10 V for the actual source.
- Reference: confirm signal common and grounding before energizing.
- Shielding: route the cable according to the official analog wiring guidance.
- Scaling: map raw values to engineering units in the controller project.
Resolve unstable measurements
- Filter choice: align notch filtering with the observed interference.
- Source check: compare the terminal voltage with controller data.
- Alarm review: use channel limits to distinguish process and wiring faults.
- Common potential: investigate reference differences because channels are non-isolated.
Supported product applications
- Voltage transmitters: acquire standard unipolar analog signals.
- Bipolar measurements: monitor sources that operate across a ±10 V range.
- Machine feedback: bring compact voltage sensors into POINT I/O stations.
- Panel modernization: retain two-channel voltage acquisition with documented scaling.