Features:
- Four-loop control: high-density current outputs for process devices
- Range choice: 0...20 mA or 4...20 mA by channel configuration
- Transition control: programmable ramp, clamp, and communication-fault response
1734-OE4C lets one narrow POINT I/O position command four analog current devices.
The engineering focus is not just output accuracy but the behavior each channel adopts during startup, program mode, and a lost controller connection.
Measured loop checkout should confirm commanded current, field-power margin, load response, and the documented fallback state.
Availability of 1734-OE4C is subject to Apter Power inventory and sourcing confirmation.
Allen-Bradley 1734-OE4C POINT I/O 4-Channel Analog Current Output Module Manuals and Product Resources
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Allen-Bradley 1734-OE4C POINT I/O 4-Channel Analog Current Output Module Specs
General
- ManufacturerAllen-Bradley
- Model1734-OE4C
- ConditionNew Original ready stock
- Product FamilyPOINT I/O 1734
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Define every output transition
- Startup: document the output before communication is established.
- Program mode: choose hold or a defined fallback from the process design.
- Communication fault: validate the configured channel response.
- Recovery: test ramp and clamp behavior when control resumes.
Commission the current paths
- Range: match each receiver to 0...20 mA or 4...20 mA.
- Load: verify loop resistance and 24 V DC field-power margin.
- Measurement: compare commanded data with a calibrated current reading.
- Actuator: confirm travel, direction, and safe process response.
Supported product applications
- Valve positioners: command four current-driven process actuators.
- Drive references: provide analog current speed or torque demand where approved.
- Skid control: consolidate multiple 4...20 mA outputs in a compact node.
- Panel modernization: restore a documented four-channel current-output position.