Features:
- Indoor NEMA Type 4X catalog when correctly panel-mounted
- P2 electrical configuration within the DTAM Plus family
- VFD and 40K application functions with a separate printer path
The combined P2N suffix changes both the electrical source decision and the installed-enclosure assessment for 2707-V40P2N.
Its VFD and 40K identities explain how operators recognize and use the station, while the completed panel determines whether the Type 4X claim remains applicable.
Supply, display access, and application functions must therefore be evaluated independently within the same sealed operator-station design.
Apter Power can coordinate official-document review, quotation, and sourcing support for 2707-V40P2N.
2707-V40P2N DTAM Plus NEMA Type 4X VFD Operator Interface Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- AC source: The P2 input accepts the documented high-voltage AC range and its specified protective fuse.
- DC alternative: A separate high-voltage DC range is permitted only when the panel circuit is designed for it.
- Catalog separation: P1 low-voltage assumptions must not be carried into a P2 replacement or test bench.
- Closed-panel view: The fluorescent display supports reading status while the indoor Type 4X enclosure remains closed.
- Front adjustment: Keypad brightness control lets the operator tune visibility from the sealed face without editing the application.
- Heat-soak check: The VFD ambient limit must be verified after the completed enclosure and neighboring equipment reach operating temperature.
- Dedicated channel: The 40K printer path remains separate from controller communications inside the P2N installation.
- Enclosure entry: Any printer or decoder cable route must preserve the completed indoor Type 4X boundary.
- Defined purpose: Time-stamped output or decoded input should be assigned in the application before the sealed cable path is accepted.
- Sealed indoor panels: Provide local controller access where the completed enclosure must maintain an indoor Type 4X boundary.
- Recipe and point tasks: Support approved controller-data changes from the operator station.
- Recorded production work: Produce clocked information or accept configured decoded input through the peripheral channel.