Features:
- Terminal family: PanelView Standard 600 color keypad HMI.
- Network: DH-485 through an RS-232 physical interface.
- Power: 24 V DC version identified by the L1 suffix.
The stored application defines the machine graphics, alarms and keypad commands used by the operator.
Serial parameters, DH-485 addressing, interface hardware and DC supply form one compatibility set.
Migration must consider network conversion, panel geometry, wiring and the retained application together.
Apter Power supports exact-catalog and migration review for the Allen-Bradley 2711-K6C9L1 PanelView 600 Terminal.
Allen-Bradley 2711-K6C9L1 PanelView 600 Terminal Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Uses a color display for machine visualization and alarm presentation.
- Accepts navigation and application-defined commands through the keypad.
- Runs the screen and control objects stored in the HMI project.
- Uses an RS-232 physical interface configured for DH-485 communication.
- Requires node settings, cable pinout and interface hardware to match the installed system.
- May need a serial-network conversion method when migrating to a newer HMI.
- Uses 24 V DC input power as identified by the L1 suffix.
- Requires project backup and connection records before removal.
- Verify DC polarity, panel opening and adapter needs before replacement.
- Operator interface on legacy DH-485-connected machinery.
- Color display of process status, alarms and operating commands.
- Service replacement where the serial settings and original project are available.