- Provides twelve push-in field terminals
- Supports tool-free insertion and lever-assisted release
- Offers marking, test access, and customer coding
X20TB12 is a B&R 12-pin push-in terminal block designed for the X20 System.
The terminal block connects a larger terminal set to a compatible X20 electronic module while keeping field wiring removable from the I/O slice.
Before installation or replacement, verify the complete material number, twelve-pin terminal assignment, compatible electronic and bus modules, conductor material and cross-section, stripping length, ferrules, voltage and current limits, customer coding, and quoted-stock contents.
Availability, condition, price, and shipping time for X20TB12 are confirmed during quotation.
B&R X20TB12 12-pin Push-in Terminal Block Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Only copper conductors are permitted
- Strip conductors to the documented 7 to 9 millimeter length
- Conductor and ferrule sizes must remain within the official limits
- The terminal block must match the electronic module terminal map
- X20TB12 provides twelve pins
- Do not assume the terminal block is included with the electronic module
- Confirm every conductor is fully retained
- Use appropriate probes at the test access points
- Verify polarity and common terminals against the wiring schedule
- Twelve-terminal wiring for compatible 24 VDC X20 modules
- Power-supply and signal-module field wiring
- X20 installations requiring removable push-in terminals