- Configures eight channels individually as digital inputs or outputs
- Provides two 50 kHz event counters and one gate-time measurement
- Supports flexible IP67 field I/O close to the machine
X67DM1321 is a B&R 8-channel configurable digital mixed i/o module designed for the X67 System.
The module provides flexible local digital I/O and fast event acquisition where field requirements can change between machine variants.
Before installation or replacement, verify the complete material number, each channel direction, 4 A total output load, counter and gate assignment, input filter, M8 pinout, field-power wiring, inductive loads, X2X project mapping and IP67 sealing.
Availability, condition, price, and shipping time for X67DM1321 are confirmed during quotation.
B&R X67DM1321 8-channel Configurable Digital Mixed I/O Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Every channel direction is defined in the controller project
- Physical connector labels must follow the configured input or output role
- A replacement must preserve the exact process-image mapping
- Inputs one and three provide the two 50 kHz event counters
- One gate-time measurement can use input two or input four
- Counter signal quality and cable routing must support the required edge rate
- Each output is rated 0.5 amperes
- The combined output current is limited to 4 amperes
- Short-circuit, inductive-load and thermal behavior must be checked for connected actuators
- Flexible sensor and actuator points on modular machine sections
- Two-channel 50 kHz event counting with gate control
- IP67 mixed-I/O stations for machine variants with changing channel roles