- Reads eight 24 VDC type 1 digital sensors
- Uses sealed M8 field connections in an IP67 housing
- Provides protected sensor power for distributed machine wiring
X67DI1371 is a B&R 8-channel digital input module designed for the X67 System.
The module acquires distributed digital field signals close to the machine while X2X Link carries process and diagnostic data.
Before installation or replacement, verify the complete material number, the 24 VDC type 1 sensor characteristics, M8 pinout, sensor-supply load, X2X topology, filter timing, IP67 connector sealing and machine response time.
Availability, condition, price, and shipping time for X67DI1371 are confirmed during quotation.
B&R X67DI1371 8-channel Digital Input Module Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Each input uses a three-pin M8 connector
- Input thresholds and current suit documented 24 VDC type 1 sensors
- Unused connectors require suitable sealing caps to maintain IP67 protection
- The hardware filter is 100 microseconds or less
- A 1 millisecond software filter also affects response time
- Machine sequencing must include total sensor, filter and network delay
- Sensor power is limited to 0.5 amperes total
- The supply is short-circuit protected
- Cable voltage drop and total connected sensor current must be checked
- Distributed proximity and limit-switch acquisition on machine sections
- Fast 24 VDC sensor monitoring outside the control cabinet
- IP67 digital input islands linked to an X2X automation station