- Multiple-approval 3300 XL 8 mm probe with 1.0 m probe cable
- 17.5 in penetration through a conductive glass-reinforced PPS housing
- 3/4-14 NPT mounting thread with hardline-conduit fitting and plug set
Bently Nevada 31000-28-10-00-175-01-02 provides an externally mounted housing for a 3300 XL 8 mm proximity probe in machinery vibration and phase-reference installations.
Its decoded configuration includes a 1.0 m probe cable, no standoff adapter, 17.5 in penetration, one 3/4-14 NPT fitting, two plugs, and a 3/4-14 NPT mounting thread.
Verify the full transducer system, approvals, mounting geometry, conduit, and sleeve support before installation. The long sleeve must be supported near the probe because the configured length exceeds 12 in.
Availability, condition, price, and shipping time for 31000-28-10-00-175-01-02 are confirmed during quotation.
Bently Nevada 31000-28-10-00-175-01-02 Proximity Probe Housing Assembly Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- 28 selects a multiple-approval 3300 XL 8 mm probe
- 10, 00, and 175 specify a 1.0 m cable, no standoff, and 17.5 in penetration
- 01 and 02 specify the fitting set and 3/4-14 NPT mounting thread
- Conductive glass-reinforced PPS housing body
- AISI 304 sleeve with AISI 303 outer sleeve and external screws
- Neoprene O-ring with CSA Type 4X and IP66 environmental ratings
- Support the sleeve near the probe because C plus D exceeds 12 in
- Confirm probe gap, target material, cable routing, and conduit sealing
- Use only the approved associated system and barriers in intrinsically safe areas
- Radial vibration measurement on rotating machinery
- Keyphasor phase-reference and speed measurement
- Intrinsically safe proximity measurement with an approved complete transducer system