Features:
- The 330101-00-15-20-02-05 features a 3/8-24 UNF thread configuration with armor protection.
- This model includes a rugged PPS plastic probe tip with thicker coil encapsulation.
- The 330101-00-15-20-02-05 is fully backward compatible with non-XL 3300 series components.
The 330101-00-15-20-02-05 provides essential monitoring functions common to the 3300 XL series, and is a critical component directly affecting the proper operation of the overall machinery protection system. It can be configured with an optional FluidLoc cable option, which prevents oil and other liquids from leaking out of the machine through the cable's interior. The 330101-00-15-20-02-05 also supports connector protectors for increased environmental protection, recommended for all installations, especially when cables must run through restrictive conduit.
Bently Nevada recommends the use of 8 mm probes like the 330101-00-15-20-02-05 when possible to provide optimal robustness against physical abuse. The armored construction of this probe adds an additional layer of protection during installation and operation in harsh environments. The 330101-00-15-20-02-05 delivers reliable vibration and position monitoring while maintaining the rugged construction expected from the 3300 XL series.
The 330101-00-15-20-02-05 is fully backward compatible and interchangeable with non-XL 3300 series 5 mm and 8 mm transducer system components. This compatibility includes the 3300 5 mm probe for applications where an 8 mm probe is too large for available mounting space. The 330101-00-15-20-02-05 ensures consistent performance while addressing fluid leakage concerns through optional FluidLoc technology and providing enhanced durability through armored construction.
The 330101-00-15-20-02-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-15-20-02-05 3300 XL 8 mm Proximity Probes Manuals,
Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
Bently Nevada 330101-00-15-20-02-05 3300 XL 8 mm Proximity Probes Specs
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-15-20-02-05
- Condition New Original ready stock
- Product Family
330101-00-15-20-01-05,330101-00-15-20-11-05,330101-00-15-20-12-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Radial vibration monitoring: Measures the dynamic movement of a shaft relative to a sliding bearing, identifying imbalances, misalignments, or mechanical looseness.
- Axial displacement (thrust) monitoring: Measures the forward and backward movement of the rotor, preventing collisions between the rotor and stators (such as turbine blades and casing).
- Phase reference (Keyphasor): Monitors keyways or protrusions on the shaft, providing a phase reference for speed signals and vibration analysis.
- High Temperature and High Pressure Resistance: The probe tip can operate continuously in environments ranging from -51°C to +177°C and can withstand fluid pressures in operating conditions.
- Chemical Corrosion Protection: The probe housing and cable are made of oil- and corrosion-resistant materials (such as PPS and FEP), resisting lubricating oil, corrosive gases, and moisture.
- Physical Protection (Special Configuration): The "20" in this model code indicates the presence of a joint protector, which effectively prevents oil from entering the connection between the probe and the extension cable and increases mechanical tensile strength.
- Signal Transmission and Conversion: The probe converts displacement changes into a weak electrical signal, which is transmitted via an extension cable to the proximitor sensor, where it is converted into a voltage signal proportional to the displacement (standard 7.87 V/mm).
- OK Loop Monitoring: The system continuously monitors the probe's bias voltage. If a cable breakage or loose connector causes an abnormal voltage, the system will automatically trigger a "NOT OK" alarm and disable the interlocking shutdown logic to prevent accidental tripping.