Features:
- Full Interchangeability Without Calibration
- Patented Mechanical Robustness for Harsh Environments
- Global Hazardous Area Approvals for Critical Safety
The Bently Nevada 330101-00-16-10-01-05 is fully interchangeable with other 3300 XL 8 mm and legacy 3300 5 mm/8 mm components. This eliminates the need for costly and time-consuming bench calibration or component matching, significantly reducing inventory complexity and maintenance downtime.
Featuring TipLoc and CableLoc molding technologies, the Bently Nevada 330101-00-16-10-01-05 provides a 330 N pull strength, ensuring the probe tip and cable remain securely attached under extreme vibration and mechanical stress. The gold-plated ClickLoc connectors offer finger-tight, corrosion-resistant connections with an audible click, preventing loosening in high-flow or turbulent conditions.
Certified with CSA, ATEX, and IECEx (Ex ia IIC T4/T5 Ga), the Bently Nevada 330101-00-16-10-01-05 is approved for installation in Zone 0, Zone 1, and Division 1 hazardous locations. This makes it ideal for refineries, gas pipelines, and offshore platforms where explosive atmospheres are present, ensuring both personnel safety and regulatory compliance.
The 330101-00-16-10-01-05 Bently Nevada 3300 XL 8 mm Proximity Probes may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-16-10-01-05 3300 XL 8 mm Proximity Probes Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330101-00-16-10-01-05 3300 XL 8 mm Proximity Probes
General
- Manufacturer GE / Bently Nevada
- Model 330101-00-16-10-01-05
- Condition New Original ready stock
- Product Family 330101-00-28-10-02-00,330101-00-12-10-02-05,330101-00-16-10-02-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Wide Extreme-Temperature Operation – The Bently Nevada 330101-00-16-10-01-05 performs reliably in ambient temperatures from -52°C to +177°C. When paired with standard extension cables, the system retains ±10% scale factor stability across this range, suitable for both arctic and high-heat turbine decks.
- High-Humidity and Condensing Conditions – Tested per IEC 60068-2-3, the probe experiences less than 3% change in average scale factor after 56 days at 93% relative humidity, ensuring accuracy in tropical climates or steam-filled turbine enclosures.
- Magnetic Field Immunity – In the presence of 60 Hz magnetic fields up to 300 Gauss, the Bently Nevada 330101-00-16-10-01-05 exhibits minimal output noise (as low as 0.0004 mils/Gauss with proper shielding), preserving signal integrity near generators or large motors.
- Chemical and Oil Resistance – The standard FEP cable insulation and PPS probe tip resist degradation from turbine oils, hydraulic fluids, and mild acids. For applications where fluid wicking through the cable interior is a concern, the optional FluidLoc cable variant provides additional positive sealing.
- Global Explosive Atmosphere Certifications – The probe carries CSA, ATEX, and IECEx approvals (Ex ia IIC T4/T5 Ga), allowing installation in Zone 0, Zone 1, and Division 1 hazardous areas, including oil refineries and chemical plants.
- API 670 Full Compliance – The Bently Nevada 330101-00-16-10-01-05 meets the American Petroleum Institute’s Standard 670 for mechanical configuration, linear range, accuracy, and temperature stability, ensuring acceptance in major refinery and pipeline projects.
- EMC and CE Marking – Compliant with EMC Directive 2014/30/EU (EN 61000-6-2 and EN 61000-6-4), the probe maintains immunity in industrial environments without requiring special shielded conduit or metallic housings.
- Functional Safety (SIL 2 / SIL 3) – The 3300 XL system supports SIL 2 (HFT=0) and SIL 3 (HFT=1) capability per IEC 61508, making it suitable for safety instrumented functions in high-risk processes.
- Turbomachinery Vibration Monitoring – The Bently Nevada 330101-00-16-10-01-05 is ideal for continuous monitoring of radial and axial vibration in steam and gas turbines, helping prevent catastrophic blade and bearing failures.
- Compressor Position Measurement – Used in centrifugal and reciprocating compressors, this probe detects shaft position changes relative to the housing, enabling early warning of thrust bearing wear or rotor instability.
- Keyphasor & Speed Detection – The probe provides a once-per-turn reference signal for speed and phase measurement, essential for balanced machinery and overspeed protection systems in API 670-compliant installations.
- Fluid-Film Bearing Machines – Specifically designed for fluid-film bearing applications, the Bently Nevada 330101-00-16-10-01-05 measures both static gap and dynamic vibration with high linearity across a 2 mm range.