Features:
- Measures both static position and dynamic vibration by producing an output voltage proportional to probe-tip distance from a conductive target.
- Uses a ClickLoc connector with connector protector, FluidLoc cable, 75-ohm triaxial FEP-insulated cable, PPS probe tip, and stainless steel probe case.
- Supports component interchangeability and backward compatibility within specified 3300 XL and non-XL 3300 series 5 mm and 8 mm transducer system configurations.
Bently Nevada 330101-00-16-10-11-05 provides a practical sensing point for machinery condition monitoring where shaft position and vibration information are required. Its 8 mm proximity probe configuration is suited to fluid-film bearing machines, where non-contact observation of a conductive surface allows machine movement to be evaluated without mechanical contact. Static and dynamic measurements can therefore be obtained through the same transducer system. Keyphasor reference and speed measurement applications further extend its role in rotating machinery monitoring.
For industrial installations, Bently Nevada 330101-00-16-10-11-05 combines a compact 1.6-inch case with a 1.0-meter probe length and a 3/8-24 UNF threaded mounting arrangement. PPS at the sensing tip and AISI 303 or 304 stainless steel for the case provide the specified material construction. The FluidLoc cable terminates in a miniature coaxial ClickLoc connector protected by a connector protector. CSA, ATEX, and IECEx approvals are included in the specified approval option.
Bently Nevada 330101-00-16-10-11-05 becomes part of a complete measurement chain when paired with the appropriate 3300 XL extension cable and Proximitor Sensor. Interchangeability among system components simplifies integration because individual probes, extension cables, and Proximitor sensors do not require matching or bench calibration. Backward compatibility with specified non-XL 3300 series components also supports installations where existing 5 mm or 8 mm hardware remains in service. Such flexibility is valuable for machinery monitoring systems that require component replacement or configuration changes while retaining established 3300 series infrastructure.
The 330101-00-16-10-11-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330101-00-16-10-11-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330101-00-16-10-11-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330101-00-16-10-11-05
- Condition New Original ready stock
- Product Family 330101-00-16-10-01-05,330101-00-16-10-02-05,330101-00-16-05-11-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Condition Monitoring: Enables precise measurement of dynamic vibration and displacement of rotating shafts.
- Error Compensation: Features excellent temperature cross-sensitivity with automatic suppression.
- Signal Transmission: Maintains lossless signal output over long-distance physical cables.
- Fault Warning: Identifies wear and misalignment of rotating machinery bearings in advance.
- Explosion-proof Certification: Meets intrinsically safe standards for operation in high-risk environments.
- Electromagnetic Compatibility: Possesses resistance to strong electromagnetic and radio frequency interference in industrial environments.
- Robust Structure: High-pressure sealed probe housing design prevents media leakage.
- Fault-tolerant Logic: Supports system disconnection and sensor failure detection and protection.
- Steam Turbine Units: Deployed for monitoring the condition of main bearings in large generator sets.
- Industrial Fans: Suitable for measuring the vibration of high-speed exhaust and induced draft fan shafts.
- Gearbox housing: Embedded monitoring of the input shaft displacement of heavy-duty gearboxes.
- Compressor group: Real-time tracking of the axial movement of petrochemical centrifugal compressors.