Features:
- Non-Contact Eddy Current Displacement and Vibration Transducer for Machinery Protection
- Integrated FluidLoc Cable and Patented CableLoc Design with 330 N (75 lbf) Pull Strength
- Certified for Hazardous Environments with CSA, ATEX, and IECEx Approvals
The Bently Nevada 330103-00-16-50-12-05 operates as an 8 mm Proximity Probe within the 3300 XL series, providing precise, non-contact measurement of shaft vibration and position to monitoring systems.The 330103-00-16-50-12-05 incorporates a patented TipLoc molding method that provides a robust bond between the probe tip and body, along with a patented CableLoc design that delivers 330 N (75 lbf) of pull strength to securely attach the probe cable to the tip.
The 330103-00-16-50-12-05 delivers critical vibration and displacement signals common to machinery protection systems, acting as a vital sensor at the front end of the monitoring path that directly affects the early detection of equipment faults. The probe mounts directly into bearing housings or internal machine brackets to observe rotating target surfaces, connecting downstream to a 3300 XL extension cable and Proximitor sensor to form a fully matched 5.0-meter proximity transducer system.
For demanding fluid-sealed applications, the 330103-00-16-50-12-05 features a specialized FluidLoc cable that prevents oil and other liquids from leaking out of the machine through the cable’s interior. Interconnection is handled by a corrosion-resistant, gold-plated miniature coaxial ClickLoc connector, which requires only finger-tight torque to achieve a secure hold—clicking when fully engaged while its engineered locking mechanism prevents loosening under machine vibration.
The 330103-00-16-50-12-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330103-00-16-50-12-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330103-00-16-50-12-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer Bently Nevada
- Model 330103-00-16-50-12-05
- Condition New Original ready stock
- Product Family 330103-00-16-50-12-00,330103-00-16-50-12-CN
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Shaft Vibration Monitoring: Measures radial dynamic motion of industrial machine shafts.
- Axial Position Sensing: Tracks thrust movement to prevent catastrophic rotor-to-stator contact.
- Eccentricity Measurements: Identifies rotor bow or warp during machine startup.
- Casing Phase Reference: Provides Keyphasor signals for speed and timing analysis.
- Industrial Deployments: Used in gas turbines, steam turbines, compressors, and pumps.
- System Integration: Connects directly to Bently Nevada 3300 XL Proximitor Sensors.
- Extension Cable Match: Integrates with a 5.0-meter total length system network.
- Thread Configuration: Utilizes an English M10x1 unthreaded length mechanical mounting profile.
- Connector Type: Features a miniature coaxial ClickLoc connector for secure links.
- Signal Output: Transmits high-frequency AC signals back to monitoring racks.
- Linear Range: Delivers accurate voltage output across a 2.0 mm operational gap.
- Scale Factor: Offers a stable 7.87 V/mm scale factor for precision tracking.
- Thermal Stability: Maintains calibration accuracy across extreme industrial temperature fluctuations.
- Interchangeability: Allows probe replacement without recalibrating the entire monitoring system.
- Rugged Design: Resists degradation from corrosive lubricants, moisture, and chemical exposure.