Features:
- 8 mm Proximity Sensing for Industrial Vibration Monitoring
- M10 x 1 Thread with Integrated Armor Protection
- Operates in Conjunction with 3300 XL Proximitor Sensors and 3500 Monitoring Systems
The 330104-00-16-05-02-05 operates as a high-performance proximity probe in industrial machinery protection systems, providing reliable eddy current-based displacement measurements for rotating equipment. It continuously converts physical gap distance between the probe tip and a conductive target into a proportional electrical signal and transmits this signal through the cable assembly to support steady state monitoring of shaft vibration, position, and speed. Seamless signal transmission is standard with the 330104-00-16-05-02-05, and using it in conjunction with compatible proximitor sensors ensures accurate linear measurement range of approximately 2 mm (80 mils). The 330104-00-16-05-02-05 has made improvements in several areas over previous probe designs in addition to incorporating robust armor cable protection within harsh industrial environments.
The 330104-00-16-05-02-05 provides essential sensing functions common to the entire machinery protection system, and is a critical component of the measurement path, directly affecting the proper, normal operation of the overall condition monitoring system. One or multiple 330104-00-16-05-02-05 probes are required per machine train depending on the desired measurement points. The 330104-00-16-05-02-05 occupies minimal installation space with its compact 160 mm case length and is always located in close proximity to the machine bearing housing (the dedicated measurement position).
For comprehensive machinery protection applications, the 3300 System requires the 330104-00-16-05-02-05 probe installed with appropriate extension cables and proximitor sensors. In addition to standard single probe operation, the complete configuration also performs automatic signal conditioning. The 3300 measurement chain executes signal processing using the internal circuitry specified in the proximitor options. Using this method, the monitoring system continually tracks the health of rotating components. If the system detects that the shaft vibration or position is outside configured alarm/trip levels, it will automatically trigger protective actions and place an event in the System Event List.
The 330104-00-16-05-02-05 Bently Nevada 3300 XL 8 mm Proximity Probe may still be available for purchase and support from Apter Power beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330104-00-16-05-02-05 3300 XL 8 mm Proximity Probe Manuals,Datasheets,Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330104-00-16-05-02-05 3300 XL 8 mm Proximity Probe Specs
General
- Manufacturer GE / Bently Nevada
- Model 330104-00-16-05-02-05
- Condition New Original ready stock
- Product Family 330104-00-16-05-02-00,330104-00-16-05-02-CN,330104-00-16-05-12-05
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Vibration Measurement: Monitoring radial vibration on fluid-film bearing machines (e.g., pumps, compressors, turbines).
- Position Monitoring: Measuring axial (thrust) position and radial position (gap) to detect shaft wear or misalignment.
- Speed & Phase Reference: Used in Keyphasor® applications to provide timing signals and speed measurements (RPM).
- API 670 Compliance: Fully compliant with American Petroleum Institute (API) 670 standards for machinery protection systems.
- Signal Output: Generates an output voltage directly proportional to the distance between the probe tip and a conductive target (usually a steel shaft).
- Interchangeability: The probe, extension cable, and Proximitor® sensor are 100% interchangeable without requiring field calibration.
- Robustness: Features TipLoc™ and CableLoc™ technologies, providing high pull strength (up to 330 N) to prevent mechanical failure in harsh industrial environments.
- ClickLoc™ Connectors: Gold-plated brass connectors that "click" to ensure a secure, vibration-resistant connection.
- RFI/EMI Immunity: High resistance to radio frequency interference, allowing installation near radios or in fiberglass housings without signal degradation.
- Remote Transmission: Can transmit signals over up to 305 metres (1,000 feet) of field wiring to a central monitoring system with minimal signal loss.