Features:
- 6.0 meter length provides extended reach for remote Proximitor placement while maintaining signal integrity over the longer run.
- Stainless steel armor with FEP jacket delivers mechanical protection and chemical resistance for demanding process compressor environments.
- Backward compatibility with 3300 RAM components enables partial system upgrades, allowing facilities to transition to NSv technology incrementally.
The 330930-060-04-00 gives field engineers the flexibility to locate Proximitor sensors away from the machine without adding extra extension cables or dealing with connection points that can fail. Its 6.0 meter length strikes a practical balance—enough slack to reach a control cabinet or junction box, but not so much that it creates cable management headaches.
This cable is built for the places where standard cables quit. The stainless steel armor takes the abuse of conduit pulls, tight bends, and accidental impacts without crushing the inner conductors. The FEP jacket adds a second line of defense, shrugging off the oils, solvents, and aggressive chemicals that can eat through ordinary cable insulation.
The 330930-060-04-00 is designed to work with both the old and the new. For facilities still running 3300 RAM systems, it slides right into place—mechanically and electrically interchangeable with existing RAM extension cables. This means you can upgrade the Proximitor sensor to NSv technology without touching the rest of the wiring.
The 330930-060-04-00 Bently Nevada 3300 NSv Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330930-060-04-00 3300 NSv Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330930-060-04-00 3300 NSv Extension Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 330930-060-04-00
- Condition New Original ready stock
- Product Family 330930-045-04-00,330930-065-04-00,330930-040-00-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Centrifugal Air Compressors: Many integrated gear-driven air compressors have very small shaft diameters; the 3300 NSv is a standard configuration.
- High-Speed Compact Turbines: Such as small steam turbines or gas diffusers.
- Aerospace/Test Bench Applications: Used for vibration testing of small bearings in laboratory environments or aircraft components.
- Intermediate Connection: Typically requires an extension cable; the total length must precisely match the system requirements of 5 meters or 7 meters.
- Preamplifier End: Connects to a 3300 NSv Proximitor to convert displacement changes into a negative DC voltage signal (e.g., 200 mV/mil).
- Connector Type: Employs ClickLoc™ gold-plated quick-connect connectors with an anti-loosening mechanism to ensure constant contact resistance in high-vibration environments.
- Hazardous Area Certification (Ex): When used with a Zener Barrier or intrinsically safe preamplifier, it complies with ATEX/IECEx Intrinsic Safety (ia) certification, applicable to Zones 0, 1, and 2.
- API 670 Compliance: Designed to meet the American Petroleum Institute standards for mechanical protection systems, ensuring reliability that meets industrial interlocking requirements.
- Self-Diagnostic Function: Supports OK Circuit monitoring. If a short circuit or open circuit occurs in the probe cable, the system will immediately identify and alarm, preventing false trips due to sensor malfunction.