Features:
- Stainless steel armor with FEP jacket provides mechanical durability and chemical resistance for harsh process compressor and industrial environments.
- Backward compatibility with 3300 RAM components enables partial system upgrades, allowing facilities to phase in NSv technology without complete system replacement.
- Integrated connector protector seals the connection against moisture and contaminants, reducing field sealing work and improving long-term reliability.
The 330930-040-04-00 is built to withstand the toughest industrial conditions. Its stainless steel armor shields the cable against crushing, abrasion, and impact damage during installation and operation—critical when cables must be routed through restrictive conduit or are exposed to rough handling. The FEP jacket adds a layer of chemical resistance, standing up to solvents, oils, and aggressive process media common in compressor applications.
The 330930-040-04-00 is designed to support multiple upgrade scenarios, simplifying the transition to NSv technology. For facilities with existing 3300 RAM systems, the cable can be used with existing probes and monitoring systems—only the Proximitor sensor needs replacement to achieve NSv performance. For sites still running 3000 or 7000-series systems, the cable must be part of a complete component replacement, but its compatibility ensures that new NSv components integrate seamlessly..
The 330930-040-04-00 includes an integrated connector protector that seals the connection against moisture and contaminants, eliminating the need for field-applied silicone tape or other sealing methods. This reduces installation time and removes a common source of field error. The 4.0 meter length is ideal for typical installations where the Proximitor sensor is located near the machine, providing enough slack for easy routing without excess cable that requires management.
The 330930-040-04-00 Bently Nevada 3300 NSv Extension Cable may still be available for purchase and support from Apter Power beyond
End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330930-040-04-00 3300 NSv Extension Cable Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Bently Nevada 330930-040-04-00 3300 NSv Extension Cable Specs
General
- Manufacturer GE / Bently Nevada
- Model 330930-040-04-00
- Condition New Original ready stock
- Product Family
330930-060-04-00,330930-065-04-00,330930-040-00-00
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not
included with this equipment unless listed in the above stock item description. All prices are
shown in USD.
- Small centrifugal compressors and pumps: For precise vibration monitoring of bearings with extremely small clearances.
- Auxiliary rotating equipment: Such as cooling fans, gearboxes, and small motors.
- Hydrostatic bearing monitoring: Measuring the trajectory and displacement of the shaft center in narrow internal spaces.
- Temperature Range: The probe tip typically withstands a wide temperature range of -35°C to +177°C (-31°F to +350°F).
- Dielectric Resistance: The probe tip is encapsulated in high-quality polyphenylene sulfide (PPS) or similar engineering plastics, providing resistance to most industrial lubricants, solvents, and chemical coolants.
- Physical Protection: The housing is typically made of 303 or 316 stainless steel, providing basic corrosion protection.
- Scale Factor: Standard is 200 mV/mil (7.87 V/mm) or 100 mV/mil (depending on the specific preamplifier model).
- Bently Nevada 3500/42M: Connects to a displacement monitoring card, providing real-time vibration, displacement, speed, and alarm outputs (OK/Alert/Danger).
- Distributed Control System (DCS): Data is uploaded to the control room for process interlocking via the preamplifier's 4-20mA output (if a converter is used) or through the 3500 system's communication module. Diagnostic Functions: Supports in-depth analysis of System 1 software, including orbit plots, waveforms, and spectrum analysis, to assist in predictive maintenance.