Features:
- Hardware identity: EIOC spare Ethernet I/O Card
- Module capacity: Up to 2,000 control modules
- Controller access: M-series, S-series, and PK Controllers
This ordering configuration is the KL2001X1-BD1 DeltaV Ethernet I/O Card spare part, not a complete SE4100 or SE4101 assembly.
It links licensed Ethernet device networks to DeltaV and executes monitoring, alarm, history, visualization, discrete-control, and limited PID functions.
Confirm the protocol license, device count, dual horizontal carrier, and simplex or redundant architecture before replacement.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson KL2001X1-BD1:
- Replacement of the KL2001X1-BD1 card within an installed DeltaV EIOC assembly.
- Direct integration of PLCs, motor control centers, drives, switchgear, IEDs, and other Ethernet devices.
- DeltaV projects requiring alarms, history, visualization, and limited control from Ethernet-sourced data.
- Select Modbus TCP, EtherNet/IP, IEC 61850 MMS, OPC UA client, or EtherNet/IP Control Tag Integration.
- Assign the correct protocol license because one protocol is supported at a time on each EIOC.
- Configure Ethernet devices and their signals in DeltaV Explorer and DeltaV Control Studio.
- Execute as many as 2,000 control modules within the EIOC.
- Transfer up to 4,000 data values per second from DeltaV and receive up to 500 values per second.
- Choose module execution rates from 100 ms through 60 seconds according to the control design.
- Use the dual horizontal carrier for simplex or redundant EIOC arrangements.
- Place simplex EIOC and Ethernet devices on the same IP subnet.
- For redundant non-PRP networks, place the primary and secondary device-network ports on different subnets.