Features:
- Provides thirty-two high-side 24 VDC output channels for dense discrete-load control.
- Uses the dedicated Series 2 Plus terminal block designed for the 32-channel arrangement.
- Applies B4 mechanical keying to align the M-series interface with its matched termination hardware.
The VE4002S2T2B8 ordering reference belongs to the DeltaV M-series Traditional I/O family and identifies the DeltaV M-series 32-Channel DO Plus Assembly.
Dense 24 VDC actuator and relay-control cabinets requiring 32 high-side outputs.
VE4002S2T2B8 is the direct-terminal version of the 32-channel 24 VDC high-side DO Plus interface. It is not a shipping-dimension code or mass-termination assembly.
Availability of VE4002S2T2B8 is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson VE4002S2T2B8:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Dense 24 VDC actuator and relay-control cabinets requiring 32 high-side outputs.
- M-series DeltaV Series 2 Plus expansions using the direct 32-channel terminal block.
- Modernization projects that satisfy the v13.3.1 software and M-series carrier requirements.
- Drive as many as 32 field output circuits from one DO Plus interface.
- Map each high-side output to the assigned control-module function.
- Verify commanded state and field response during commissioning tests.
- Requires DeltaV version 13.3.1 or later for operation of the 32-channel DO Plus card.
- Works with MQ, MX, or PK controllers when installed on the specified M-series carriers.
- Retains B4 keying and the dedicated 32-channel Series 2 Plus terminal block during replacement.
- Review field-current demand and external circuit protection for every output group.
- Label all 32 conductors before transferring wiring to the terminal block.
- Test output polarity and load behavior before placing equipment in automatic control.