Features:
- Provides eight I/O interface positions on the S-series horizontal carrier assembly.
- Includes two 1.1 m extender cables for the specified dual-extension cabinet arrangement.
- Supplies eight power-bus plugs and one shield bar as part of the carrier configuration.
The current ordering configuration is SE4050E2C0, the DeltaV S-Series 8-Wide I/O Interface Carrier with Dual Extender Cables documented by Emerson for DeltaV S-Series Horizontal Carriers.
SE4050E2C0 is used in S-Series I/O stations that require eight interface slots on a horizontal carrier. Its system role and configuration limits must remain aligned with the official specification.
Before commissioning SE4050E2C0, verify the installed assembly, project wiring, power, software and environmental conditions that apply to this exact part number.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson SE4050E2C0:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- S-Series I/O stations that require eight interface slots on a horizontal carrier.
- Cabinet layouts using two 1.1 m extender cables between carrier sections.
- Carrier replacement where the existing power-bus and shield arrangement must be preserved.
- Requires an enclosure that satisfies the environmental rating assigned to S-series carrier hardware.
- Maintains reliable service only within the specified ambient-temperature and contamination limits.
- Protects both extender connections from conductive debris, impact, and sustained mechanical strain.
- Use the carrier with the intended DeltaV S-Series interfaces and power arrangement.
- Match E2C0 when two 1.1 m extender cables are required.
- Check adjacent carrier and extender-card compatibility before installation.
- Provide adequate cabinet clearance for eight modules and cable bends.
- Secure the horizontal assembly with the required DIN-rail stops.
- Bond the supplied shield bar according to the cabinet grounding design.