- Confirm the calibrated sensor and converter belong to the same measuring chain
- Protect the armored 10 m cable and adapter connection from strain and contamination
- Set the working gap only after verifying the actual shaft material and geometry
Emerson PR6422-013-041 is a compact 5 mm eddy current probe for non-contact shaft displacement, position and vibration measurement.
The official PR6422/013-041 order code defines M6×0.5 mounting, cable armor, a 50 mm sleeve, adapter plug, 10 m total cable and an open cable end.
Before installation or replacement, verify the matching converter and serial-number pairing, target material, shaft diameter, initial gap, cable armor route, bend radius, terminal wiring and hazardous-area documentation.
Availability, condition, price, and shipping time for PR6422-013-041 are confirmed during quotation.
Emerson PR6422-013-041 Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Use the M6×0.5 mounting thread and documented 50 mm sleeve reach
- Provide a stiff holder and keep the probe axis within the published angular tolerance
- Confirm shaft diameter and free metal clearance around the 5 mm head
- Match the sensor type and serial number to the selected converter
- Use the documented target material or a verified material-specific calibration
- Keep the measurement inside the selected static or dynamic range
- Respect the 35 mm minimum bend radius for the armored lead
- Protect the adapter plug and open cable end from moisture and tensile load
- Route the signal cable away from switching conductors and bond the shield as documented
- Radial shaft vibration measurement on compact turbomachinery locations
- Axial displacement, position or eccentricity monitoring with the matched converter
- Speed or key-related measurement where the verified target and electronics support the application