Features:
- Provides eight multiplexed analog output channels for Ovation field control loops.
- Generates 4-20 mA control signals for compatible output devices.
- Superimposes HART digital communication on the analog current signal.
5X00062G01 combines output channels of 8 multiplexed channels, control signal of 4-20 mA, and digital protocol of HART in the Ovation HART I/O platform.
It drives eight 4-20 mA HART output loops and exchanges digital device information with the Ovation system. This role connects the Ovation HART 8-Channel Analog Output Electronics Module to the surrounding Ovation HART I/O architecture.
Before commissioning, pair the electronics module with 5X00063G01; confirm the connected devices are HART-compliant outputs; and verify loop wiring and auxiliary field power.
Availability is subject to Apter Power inventory and sourcing confirmation.
Verified resources for Emerson 5X00062G01:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Controls HART-capable valve positioners through eight independently managed analog output loops.
- Returns smart-device operating parameters and diagnostic information to the connected Ovation system.
- Supports power-generation and water or wastewater processes that use Ovation HART output I/O.
- Interfaces with as many as eight HART-compliant output devices through the module's loop channels.
- Updates supported smart-device information to the controller on a two-second communication cycle.
- Uses FSK data superimposed on the analog current loop for bidirectional HART communication.
- Pairs with the 5X00063G01 personality module to form the complete supported I/O assembly.
- Integrates with the corresponding Ovation hardware family and its supported cabinet architecture.
- Confirm both module numbers match the required assembly before commissioning or replacement.
- Functions as the electronics module within the associated Ovation analog-output I/O assembly.
- Confirm that every connected field device is a HART-compliant output device before commissioning.
- Verify loop wiring and auxiliary field-power arrangements before enabling the connected output channels.