- Ultraviolet flame sensing for gas-burner supervision
- Expanded S2 processing with AutoTune and four operating files
- Integrated relays and proportional 4-20 mA flame signal
95UVS2-1 combines flame detection, signal evaluation and output switching in one Fireye InSight scanner.
The ultraviolet sensor responds in the documented 295-320 nm band, while the S2 electronics provide selectable flicker processing, local display and keypad access, stored files and remote setup capability.
Reliable service depends on the original viewing geometry, purge-air arrangement, connector wiring and burner-specific thresholds being preserved and checked during commissioning.
Availability, condition, price, and shipping time for 95UVS2-1 are confirmed during quotation.
Fireye 95UVS2-1 Expanded Ultraviolet Flame Scanner Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- UV response is intended for flame radiation in the 295-320 nm range
- Twenty-one selectable flicker frequencies support burner-specific discrimination
- AutoTune and four files allow proven settings to be retained for different operating conditions
- The internal flame relay follows the configured flame-on and flame-off thresholds
- The fault relay reports scanner self-check and operating faults to the control system
- The 4-20 mA output provides a proportional flame-strength signal for trending and setup
- The 12-pin connection, scanner mount and sight-pipe arrangement must match the installed burner
- Clean purge air and a clear sight path protect signal stability and scanner temperature
- Migration to 95UVS4-1WINC requires wiring, output, approval and commissioning review
- Gas-burner flame supervision in industrial combustion systems
- Flame relay input for compatible burner-management and safeguard controls
- Flame-strength monitoring through the proportional 4-20 mA signal