GE Mark V/VI Driver Board
General Electric
Contact Us

GE Mark V/VI Driver Board

The GE Mark V/VI Driver Board is a plug-in thyristor/IGBT driver family that mounts directly in Mark V & VI turbine racks. It supports 2 kV isolation and 1 µs dead-time and offers 10+ variants—fuel-valve drivers, exciter gate pulses, variable-speed motor drives, and protection feedback—delivering the high-current, high-voltage switching needed for turbine fuel, excitation, and load-sharing circuits in Class G3 harsh environments.

Browse GE Mark V/VI Driver Board

Browse available series in our catalog of GE Mark V/VI Driver Board products.
  • DS200DTBAG1A
    DS200DTBAG1A
    General Electric DS200DTBAG1A is a Mark V LM contact input termination module that connects the first 46 field contact inputs in a digital core to the associated TCDA board.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCPDG1B
    DS200TCPDG1B
    General Electric DS200TCPDG1B is a Mark V LM power distribution module that routes 125 V DC and selected AC supplies from the core to control, I/O, protection, and terminal-board circuits.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200SLCCG1A
    DS200SLCCG1A
    General Electric DS200SLCCG1A is the G1 SLCC communications card with both DLAN and ARCNET circuitry for GE drive-control assemblies.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200LDCCH1A
    DS200LDCCH1A
    General Electric DS200LDCCH1A combines primary drive and I/O control with five documented LAN paths for DIRECTO-MATIC 2000 drives and exciters.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200DCFBG1B
    DS200DCFBG1B
    General Electric DS200DCFBG1B is the G1B DCFB power supply board that generates drive control rails and converts voltage and current feedback signals.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200SDCCG1A
    DS200SDCCG1A
    General Electric DS200SDCCG1A is the G1 SDCC drive control card with three coordinated processors for AC2000, DC2000, and EX2000 applications.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCQAG1A
    DS200TCQAG1A
    General Electric DS200TCQAG1A is the TCQA analog I/O board that conditions turbine measurements and actuator signals across the Mark V R1, R2, and R3 cores.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCQAG1B
    DS200TCQAG1B
    DS200TCQAG1B is a General Electric Mark V RST analog input/output board for conditioning pulse, vibration, LVDT, current-loop, thermocouple, and generator signals.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCCAG1B
    DS200TCCAG1B
    DS200TCCAG1B is a General Electric Mark V common analog input/output board that conditions thermocouple, current-loop, voltage, and shaft-monitoring signals in the R5 core.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCDAH1B
    DS200TCDAH1B
    DS200TCDAH1B is a General Electric Mark V digital input/output board that processes contact inputs and relay outputs within the QD core.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCEAG1B
    DS200TCEAG1B
    DS200TCEAG1B is a General Electric Mark V emergency overspeed protection board that processes independent speed and flame-trip inputs in the protective core.
    Manufacturer: General Electric
    /4.9
    In Stock
  • DS200TCPSG1A
    DS200TCPSG1A
    General Electric DS200TCPSG1A is a Mark V LM TCPS power supply board that converts the 125 V DC feed from TCPD into the supply rails required by control-core and I/O electronics.
    Manufacturer: General Electric
    /4.9
    In Stock
2 3 4 5 6 7 8 9 10

Your needs, our focus

Our experienced service team accurately understands product requirements and service needs, promptly fulfilling all your requests without delay