Features:
- Provides the GEM80 remote I/O interface function.
- Transfers I/O data between the controller and a supported remote station.
- Retains the specific 8174-4002 hardware suffix for legacy matching.
The 8174-4002 assembly is an interface component, not a stand-alone collection of field channels.
Its purpose is to maintain the data path across the engineered GEM80 remote-I/O arrangement.
Link wiring and station identity should be verified at both endpoints before board exchange.
Availability is confirmed against the complete 8174-4002 identity, required condition, quantity and delivery destination at quotation.
Verified resources for GEC Industrial Controls 8174-4002:
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
- Extend GEM80 I/O exchange to a remote plant cabinet.
- Maintain a distributed legacy control system with existing remote stations.
- Restore communication after failure of the original remote interface assembly.
- The interface forms one endpoint of the GEM80 remote-I/O link.
- Cable type and connector orientation must follow the original transmission design.
- Line termination should be inspected at the correct physical ends of the network.
- The opposite endpoint must use the compatible GEM80 remote-I/O generation.
- Station assignments must agree with the controller's configured I/O map.
- No cross-generation interchange should be assumed from a similar board outline.
- Install the board within the protected rack and cabinet specified for the GEM80 system.
- Prevent contamination and connector oxidation on the remote-link contacts.
- Maintain cabinet temperature and ventilation suitable for the legacy electronics.