Open now · we reply within 2 working hours

Talk to our team

+86 15359408275

Call and you reach an account manager, not a queue.


What happens next?

  1. Email confirmationYou will get an email confirming that we have received your enquiry.
  2. Dedicated Account ManagerOne of our team will be in touch to confirm your part(s) specification and condition.
  3. Your quoteYou will receive a comprehensive quote tailored to your specific needs.

Supplied with every order

  • Commercial invoice and packing list
  • Nameplate and packaging photographs
  • 12-month Apter Power warranty
Need a specific document format for your import process? Say so in the enquiry and we will confirm before you order.

Recommended to use with IC697ALG321

All in stock · Add one and it is quoted together with the model, one shipping cost.

IC697ALG321

GE IC697ALG321 is a four-channel Series 90-70 analog input interface used to bring low-level process measurements into the PLC rack.

In Stock Ships by Tuesday, November 24 Fast Shipping Available
Dispatched within 24 hours of a confirmed order.
Nameplate and packaging photographs supplied before dispatch.
ISO 9001:2015 certified

Industry compliance and certified quality in every part we supply.

View certificate

Get a price for IC697ALG321

IC697ALG321General Electric 4-Point Analog Input Module
Edit or add anything — monitor type, cable length, other part numbers.

Tell us which and we will shape the quote around it.

Attach a nameplate photo and an engineer will confirm the exact part number before quoting.

Answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8. Used only for this quotation.

Your Quote Request Has Been Received

Thank you. Our sales team will review your request and contact you shortly.

Ordering, delivery and after-sales

Your account managerNamed, start to finish

Your enquiry is picked up by a named account manager who checks the configuration before pricing and stays with the order through dispatch and after-sales. You are not passed round a shared inbox.

  • Direct email and WhatsApp for that person
  • Quotation signed by whoever prepared it
  • Same contact if anything needs sorting later

Enquiries are answered within 2 working hours, Mon–Fri 09:00–18:00 GMT+8.

Warranty12 months from shipment

Twelve months from date of shipment against functional defects under normal operating conditions. Because Apter Power is an independent supplier, the manufacturer’s own warranty does not apply — ours stands in its place, which on a discontinued part is the only cover there is.

If it arrives faulty or does not fitReturn authorisation same day

A written procedure, not a negotiation.

  • Report the fault within the 12-month warranty period
  • We issue a return authorisation the same working day
  • Return the unit within 14 days of reporting, in antistatic packaging where applicable
  • Replacement, repair or refund at our option, confirmed in writing
  • Return shipping on a confirmed warranty defect is at our cost

If it turns out to be a configuration mismatch rather than a fault, we help you identify the correct part instead of leaving you with the wrong one.

Pre-dispatch inspectionWhat we check — and what we don’t

Checked:

  • Part number and revision read from the unit nameplate, and photographed
  • Outer packaging and seals inspected and photographed
  • Connector threads and mounting stud checked for damage
  • Quantity and accessory contents verified against the packing list

Not checked: no powered functional or calibration test is performed on this item; sensitivity and frequency response are not re-certified by Apter Power; no hazardous-area certification is issued by us. If you need a functional test report before shipment, ask when you request the quote and we will confirm whether it is possible and what it adds to the lead time.

Our quality management is certified to ISO 9001:2015. More usefully, the scope above is published rather than summarised as “tested and approved” — nothing is implied that we did not do.

Shipping, customs and documentsDispatch in 24h · 170+ countries

Dispatch within 24 hours of a confirmed order for items held in stock. DHL, FedEx and UPS express to 170+ countries, typically 3–6 working days door to door; tracking is emailed the day the order leaves us. Shipping method and cost are itemised on every quotation and never added afterwards.

Most delays on an international spare are paperwork rather than freight, so the documents are prepared before the parcel leaves:

  • Commercial invoice and packing list on every shipment
  • Certificate of Origin prepared on request — ask at enquiry stage
  • HS code stated on the quotation, not discovered at clearance
  • We work to your broker’s format if you tell us what it is
PaymentTelegraphic transfer only

We accept payment by telegraphic transfer (T/T) only. Bank details appear on the pro-forma invoice and nowhere else — we never send revised bank details by email after quoting. If you receive a message claiming our account has changed, call +86 15359408275 before paying.

How to orderSend the part number

Send the enquiry above, or email the part number, quantity and destination country. In-stock items show a live quantity; where a part is not held we show "Ask" and confirm availability from our supplier network before quoting, so you are never quoted a lead time we cannot meet.

Discover the experience, people and global sourcing expertise behind Apter Power. About us »

Technical specifications

 set by the part-number suffix dotted  awaiting confirmation against the OEM datasheet

Part identification

Manufacturer
General Electric
Part Number
IC697ALG321
Product Family
GE 90-70 Series PLC
Product Type
4-Point Analog Input Module
Stock
1
Weight
0.5 kg
Tariff Code
8538900000
Country of origin
USA
Place of shipment
Xiamen, Fujian, China

More information

  • Four-point analog input module for installed GE Series 90-70 systems
  • Single-slot design with a removable field terminal board
  • Backplane integration without a separate communication interface
  • Exact catalog number and hardware revision must be verified before replacement

IC697ALG321 is intended for maintaining or restoring an existing Series 90-70 analog input position without redesigning the PLC rack. Its single-slot construction and removable terminal-board arrangement support replacement within the established cabinet layout when the installed hardware is correctly matched.

Before ordering, verify the complete IC697ALG321 catalog number, revision marking, rack compatibility and terminal-board arrangement. The visually similar IC697ALG320 should not be selected as a substitute based only on appearance or Series 90-70 compatibility.

Confirm whether the quoted unit includes the required terminal board and other removable accessories. Existing project documentation, rack allocation and spare-part records should also identify IC697ALG321 as the approved replacement before installation.

Availability, condition, included accessories, price, warranty, and shipping time for IC697ALG321 are confirmed during quotation.

GE IC697ALG321 4-Point Analog Input Module Manuals, Product Family, Links

Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.

  • Export channel references and scaling before shutdown
  • Label every field conductor and shield connection
  • Retain a traceable pre-replacement signal record
  • Confirm whether the detachable board is included
  • Compare terminal numbering with the removed assembly
  • Inspect the keyed slot and backplane connector
  • Apply controlled values to all four channels
  • Confirm engineering units and diagnostic behavior
  • Prove alarms and interlocks before process release
  • Four-channel analog acquisition in a Series 90-70 rack
  • Maintenance replacement for an installed IC697ALG321
  • Process signal monitoring where existing project documentation specifies the model

Description

IC697ALG321 is used where four analog measurement channels must be acquired through the Series 90-70 backplane. Published cross-references associate the module with ±10 V channel service and 16-bit conversion.

The field terminal assembly, reference addresses and channel scaling belong to the installed application. They should be photographed and exported before the original module is removed.

Commissioning should use a controlled source at several points on every channel, followed by verification of engineering units, diagnostics, interlocks and alarm response.

Case studies

Order from our published case studies. Each one names the customer situation, the parts involved and what changed.

Leonia
Xiamen, ChinaAutomation spares

Bureau Veritas Audit Strengthens Trust for Global Buyers

A Bureau Veritas review checked Apter Power's business licence, registered address, office and selected export records, helping overseas buyers verify the company behind a quotation before ordering.

VerifiedBusiness identity checked
BV AuditCompany records reviewed
“ Trust starts with company details and trading records that buyers can verify. — Apter Power Team ”
Leonia · Xiamen, China · 2026
Read the full case study
May
ChinaBently Nevada

Bently Nevada Audit: Zero Discrepancies, USD 25,000 Order

A customer verified Bently Nevada accelerometers, cables and 3500/22M modules at Apter Power. Zero discrepancies led to a USD 25,000 order paid three hours later.

3 hrsOrder to payment
$25,000Follow-up order
“ Apter Power gave us the evidence to approve the expansion with confidence. — Customer procurement manager ”
May · China · 2026
Read the full case study
Leonia
IndiaSiemens SIMATIC S7-400 PS 407 · 6ES7407-0DA01-0AA0

Siemens PS 407 Verified for an Indian Textile Plant

An Indian textile manufacturer asked Apter Power to verify Siemens SIMATIC S7-400 PS 407 module 6ES7407-0DA01-0AA0 by complete catalogue number, visible condition and packaging evidence before the next supply decision.

24/7Textile plant support
100%Inspected for Original & New product
“ Apter made our first overseas purchase of Siemens S7-1200 spares straightforward, with clear model confirmation and delivery arrangements. — Singh ”
Leonia · India · 9 October 2026
Read the full case study

Where this item is used

The nine industries we publish solutions for. Each links through to that industry page.

FAQs

Questions we actually get about this item. If yours is not here, put it in the message field above.

About this part

How should a buyer distinguish GE IC697ALG321 from IC697ALG320?

Match the entire label and field-terminal arrangement. The adjacent catalog number is associated with a different analog function and must not be treated as an automatic substitute.

What should be captured before removing GE IC697ALG321 from an operating rack?

Export the hardware configuration, record the slot and reference addresses, photograph terminal numbering, and document channel scaling, shield connections, alarms and interlocks.

Is the detachable terminal board automatically included with GE IC697ALG321?

Not necessarily. Treat the terminal board and any wiring accessories as separate unless the quotation and stock photographs explicitly state that they are included.

Why can GE IC697ALG321 readings change after replacement even when wiring is unchanged?

A channel range, scaling constant, reference assignment, common connection or shield path may differ. Prove the input with a calibrated source before adjusting process logic.

Can GE IC697ALG321 be installed without changing the PLC project?

Only when the exact slot, module identity, reference allocation and channel configuration already match. Review the PLC fault table after power-up for any configuration mismatch.

Can GE IC697ALG321 be removed with rack power applied?

No. Isolate rack and field energy, secure the process, retain the keyed slot and terminal identity, then install and commission the replacement under the site procedure.

What evidence should be requested before approving GE IC697ALG321 as a spare?

Request clear photographs of the front and side labels, revision marking, backplane connector, terminal interface and housing so the item can be compared with the installed module.

Can't find the part number you need?

We quote thousands of parts that never appear on this site — current, obsolete and hard to find. Send the number and we will tell you honestly whether we can get it.

Mon–Fri 09:00–18:00 GMT+8 · enquiries answered within 2 working hours

Talk to our team

An account manager works the enquiry through with you — checking the configuration before pricing, rather than sending a price list back.

Mon–Fri 09:00–18:00 GMT+8 · Xiamen, China

ISO 9001:2015 certified

Every part we supply meets industry standards and comes from a certified quality management system.

View certificate

You may also like

IC697PWR724E
The GE Fanuc IC697PWR724E is a power supply module for Series 90-70 PLCs, providing stable voltage to ensure reliable operation of industrial automation systems.
IC697CPM790-DC
The GE Fanuc IC697CPM790-DC is a high-capacity CPU module for Series 90-70 PLCs, managing up to 12K discrete I/O and enabling reliable control, program execution, and system monitoring in industrial automation.
In stock
IC697CPU780
General Electric IC697CPU780 is a 16 MHz, 32-bit floating-point CPU that operates as the primary or secondary controller in a Series 90-70 Hot Standby system.
In stock
IC697BEM733
GE IC697BEM733 connects a remote Series 90-70 rack group to a Genius bus and exchanges mapped discrete and analog I/O with the host.
In stock
IC697MDL650
General Electric IC697MDL650 is a 24 VDC 32-Point Positive-Logic Input Module that reports grouped 24 VDC sourcing-device states to Series 90-70 logic.
In stock
IC697MDL653
GE IC697MDL653 collects thirty-two 24 VDC signals through four isolated groups and supports either positive-logic or negative-logic field-device arrangements.
In stock
IC697MEM715
GE IC697MEM715 is a 128 Kbyte CMOS daughterboard that expands supported CPU771, CPU772 or PCM711 assemblies without occupying another rack slot.
In stock
IC697MEM717
GE IC697MEM717 is a 256 Kbyte CMOS daughterboard for supported CPU771, CPU772 and PCM711 hosts in the Series 90-70 platform.
In stock
IC697CPU711
General Electric IC697CPU711 is a legacy Series 90-70 rack CPU identifier supported through exact nameplate, rack and project-record matching.
In stock
IC697ALG321
GE IC697ALG321 is a four-channel Series 90-70 analog input interface used to bring low-level process measurements into the PLC rack.
In stock

Looking for a part-number suffix that is not listed? We quote thousands of Bently Nevada configurations that never appear on the site — send the part number.

Same kind of part from other manufacturers:

Product browsing history

Request a quote WhatsApp Chat