Features:
- Provides three backplane sections for M1, M2 and C.
- Gives each controller section an independent power supply path.
- Accepts ACLE or ACLA, DSPX, EISB, EMIO and ESEL in M1 and M2.
Supports test-ring connections in the control rack.
Works with two overhead cooling fans.
Maintains separation among the redundant controller channels.
Spares coordination for redundant control racks is available from Apter Power for the General Electric IS200EBKPG1A Exciter Backplane used in GE excitation-control service.
General Electric IS200EBKPG1A Exciter Backplane Manuals, Datasheets, Links
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
Board Population for IS200EBKPG1A
- Placement: Carries DSPX, EISB and EMIO positions in controller C.
- Interface: Uses upper DIN connectors for plug-in control boards.
- Operation: Uses lower D-sub connectors for I/O interface cables.
- Service point: Includes circular DIN connections for keypads and power plugs.
I/O Connectivity for IS200EBKPG1A
- Source: Uses lower D-sub connectors for I/O interface cables.
- Processing: Includes circular DIN connections for keypads and power plugs.
- Destination: Supports test-ring connections in the control rack.
- Verification: Works with two overhead cooling fans.
Channel Separation for IS200EBKPG1A
- Purpose: Supports test-ring connections in the control rack.
- Connection: Works with two overhead cooling fans.
- Behavior: Maintains separation among the redundant controller channels.
- Boundary: Forms the wiring foundation of the redundant control module.
Cooling & Installation for IS200EBKPG1A
- Input path: Maintains separation among the redundant controller channels.
- Output path: Forms the wiring foundation of the redundant control module.
- System effect: Requires connector-by-connector restoration during replacement.
- Check: Provides three backplane sections for M1, M2 and C.